adverstisement



OCTAGON PROCESS INC. -- PENETRANTING OIL,VV-P-216 -- 9150-00-529-7518
=====================  Product Identification  =====================

Product ID:PENETRANTING OIL,VV-P-216
MSDS Date:01/01/1987
FSC:9150
NIIN:00-529-7518
MSDS Number: BFCZV
=== Responsible Party ===
Company Name:OCTAGON PROCESS INC.
Address:596-RIVER-ROAD
City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Info Phone Num:201-945-9400
Emergency Phone Num:(201)945-9400
CAGE:82925
=== Contractor Identification ===
Company Name:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM OIL,
ACGIH TLV:5 MG/CUM MIST

Ingred Name:PROPELLANT(TYPE EITHER HYDROCARBON OR CARBON DIOXIDE)

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:MAY IRRITATE EYES AND SKIN OR DERMATITIS ON
    CONTACT.INHAL:-CANCAUSE,HEADACHE,NAUSEA,VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:N/R-AEROSOL
Lower Limits:0.7
Upper Limits:5.0
Extinguishing Media:FOAM,CO, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:AEROSALS CANS MAY EXPLODE AT HIGH TEMP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:TREAT AS OIL SPILL USE SUITABLE ABSORBENT TO
    RECOVER IT IN TO A CONTAINER.WASH DOWN THE SURFACE WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE.USE ADEQUATE
    VENTILATION AND NORMAL PRECAUTION FOR HANDLING OIL SPILLS.
Other Precautions:AVOID SKIN AND EYES CONTACT.DO NOT INHALE AN OIL
    MIST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY CONDITIONS/
    ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
    VENTILATION
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
UNDATED MSDS RECD 22JUN84. SINCE PROPELLANT NOT SPECIFIED, WORST CASE
    ASSUMED, IE, FLAMMABLE.

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:338-572F
Vapor Density:4.5
Spec Gravity:0.81
Solubility in Water:INSOLUBLE
Appearance and Odor:PALE YELLOW COLOR-OILY ODOR
Percent Volatiles by Volume:UNKN

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:NONE SPECIFIED

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF THE COLLECTED MATERIAL IN ACCORDANCE
    WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.