adverstisement



DUNTON N W CO -- NOKORODE SOLDERING PASTE -- 3439-00-900-3654
=====================  Product Identification  =====================

Product ID:NOKORODE SOLDERING PASTE
MSDS Date:12/27/1990
FSC:3439
NIIN:00-900-3654
MSDS Number: BMTNR
=== Responsible Party ===
Company Name:DUNTON N W CO
Address:3 BRIDAL AVE
City:WEST WARWICK
State:RI
ZIP:02893-2901
Country:US
Info Phone Num:401-821-1832
Emergency Phone Num:401-821-1832
CAGE:81397
=== Contractor Identification ===
Company Name:DUNTON N W CO
Address:3 BRIDAL AVE
Box:City:WEST WARWICK
State:RI
ZIP:02893-2901
Country:US
Phone:401-821-1832
CAGE:81397

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC CHLORIDE  (SARA III)
CAS:7646-85-7
RTECS #:ZH1400000
Fraction by Wt: 10-25%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3/2 STEL
ACGIH TLV:1 MG/M3/2STEL FUME93
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:AMMONIUM CHLORIDE  (SARA III)
CAS:12125-02-9
RTECS #:BP4550000
Fraction by Wt: 10-25%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 MG/M3/20 STEL
ACGIH TLV:10 MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:GREASE, PETROLEUM
CAS:8009-03-8
Fraction by Wt: <80%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CAUSES BURNS. FUMES, DUST, OR MIST MAY
    CAUSE INJURY TO THE RESPIRATORY TRACT. SEVERE EXPOSURE MAY CAUSE
    LUNG DAMAGE. THE COMPOUND, IN EITHER SOLID OR SOLUTION FORM, IS
    CORROSIVE TO THE EYES AND SKIN.  TOXIC EFFECTS ARE LOWER
    RESPIRATORY IRRITATION WITH PULMONARY EDEMA.
Effects of Overexposure:EYE IRRITATION WITH DISCOMFORT, TEARING, OR
    BLURRING OF VISION. SKIN IRRITATION WITH DISCOMFORT OR RASH. SKIN
    BURNS OR ULCERATION. TEMPORARY LUNG IRRITATION EFFECTS WITH COUGH,
    DISCOMFORT, DIFFICULTY  BREATHING, OR SHORTNESS OF BREATH.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PREEXISTING
    DISEASES OF THE LUNGS MAY HAVE INCREASED SUSCEPTIBILITY TO THE
    TOXICITY OF EXCESSIVE EXPOSURES.

=======================  First Aid Measures  =======================

First Aid:CALL A PHYSICIAN IMMEDIATELY IN ALL CASES.  EYES: FLUSH WITH
    WATER FOR 15 MINUTES, INCLUDING UNDER EYELIDS.  SKIN: FLUSH WITH
    WATER AND SOAP.  INGESTION: GIVE PLENTY OF WATER OR MILK. DO NOT
    INDUCE VO MITING.  INHALATION: MOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:399F,204C
Extinguishing Media:FOAM, SAND OR CARBON DIOXIDE.
Fire Fighting Procedures:IF LARGE QUANTITIES ARE INVOLVED IN A FIRE,
    FIREFIGHTERS SHOULD USE SELF-CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:WHEN HEATED, THE MATERIAL MAY RELEASE
    ZINC CHLORIDE AND ZINC OXIDE FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NEUTRALIZE AND PLACE IN CONTAINER FOR
    DISPOSAL.
Neutralizing Agent:SODIUM CARBONATE OR TRI-SODIUM PHOSPHATE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:FLUX IS A STABLE MATERIAL IN CLOSED
    CONTAINERS AT ROOM TEMPERATURE UNDER NORMAL STORAGE AND HANDLING
    CONDITIONS.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE FUME OR AIR-SUPPLIED RESPIRATOR WHEN
    SOLDERING IN CONFINED NON-VENTILATED SPACES.
Ventilation:LOCAL EXHAUST DURING SOLDERING AT THE FLAME SO AS TO
    CAPTURE ALL GASES AND FUMES.
Protective Gloves:RUBBER FOR SENSITIVE INDIVIDUALS.
Eye Protection:GOGGLES OR FACE SHIELD.
Other Protective Equipment:HEAD AND BODY PROTECTION WILL HELP TO
    PREVENT INJURY FROM SPLASHING OR FROM FLAMES.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING THIS
    MATERIAL.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:120F,49C
Spec Gravity:1.06
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN/GOLD TO BLACK PASTE, NO APPRECIABLE ODOR.
Percent Volatiles by Volume:00

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MATERIAL MAY BE INCOMPATIBLE WITH NYLON AND/OR CELCON.	CYANIDES MAY
    RELEASE HCN GAS WHEN MIXED WITH ZINC CHLORIDE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FLUSH OR SHOVEL TO CHEMICAL WASTE DISPOSAL
    ACCORDING TYO FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.