adverstisement



SHIPLEY CO INC -- MICROPOSIT REMOVER 1165 -- 8010-00N056395
=====================  Product Identification  =====================

Product ID:MICROPOSIT REMOVER 1165
MSDS Date:02/27/1992
FSC:8010
NIIN:00N056395
MSDS Number: BWFYL
=== Responsible Party ===
Company Name:SHIPLEY CO INC
Address:455 FOREST ST
City:MARLBOROUGE
State:MA
ZIP:01752
Country:US
Info Phone Num:508-481-7950
Emergency Phone Num:800-424-9300(CHEMTREC)
Preparer's Name:T. BLAKESLEE
CAGE:0AS27
=== Contractor Identification ===
Company Name:SHIPLEY CO INC
Address:455 FOREST ST
City:MARLBOROUGE
State:MA
ZIP:01752
Country:US
Phone:508-481-7950
CAGE:0AS27

=============  Composition/Information on Ingredients  =============

Ingred Name:2-PYRROLIDINONE, 1-METHYL-; (N-METHYL-2-PYRROLIDONE)
CAS:872-50-4
RTECS #:UY5790000
Fraction by Wt: 95%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:NON-HAZARDOUS INGREDIENTS
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE & SKIN CONTACT CAN CAUSE
    IRRITATION, ITCHING, REDNESS, TEARING, BURNING, INFLAMMATION.
    INHALATION, INGESTION & SKIN ABSORPTION CAN CAUSE IRRITATION,
    HEADACHE, NAUSEA, VOMITING, CONFUSION, GI DDINESS.
    CHRONIC:PROLONGED, REPEATED CONTACT W/SKIN CAN CAUSE ITCHING,
    REDNESS, TEARING, BURNING, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INFLAMMATION, DERMATITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CONT MD AT ONCE. EYE:FLUSH IMMED W/PLENTY OF WATER FOR
    AT LST 15 MINS. CONT MD AT ONCE. SKIN:FLUSH IMMED W/PLENTY OF WATER
    FOR AT LST 15 MINS. REMOVE CONTAM CLTHG. CONT MD. WASH CLTHG BEFORE
    RE -USE. INHAL:MOVE INTO FRESH AIR. IF NOTBRTHG, GIVE ARTF RESP. IF
    BRTHG IS DFCLT, GIVE OXYGEN. CONT MD AT ONCE. NOTE TO MD:THERE IS
    NO SPECIFIC ANTIDOTE. TREATMENT OF OVEREXP SHOULD BE (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:190F,88C
Lower Limits:0.99%
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . CONTAINERS NEAR FIRE MAY BE COOLED W/WATER.
Unusual Fire/Explosion Hazard:PRESSURE MAY BUILD UP IN CLOSED
    CONTAINERS. THIS IS ACCELERATED BY HEAT W/POSSIBLE LIBERATION OF
    COMBUSTIBLE VAPORS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM SOURCES OF IGNIT, PROVIDE ADEQ VENT &
    SUITABLE PROT CLTHG. COLLECT W/INERT ABSORB MATL & PLACE IN
    SUITABLE CNTNR FOR DISP. DISP OF CONTAM PROD & MATLS USED IN
    CLEANING UP SPILLS & LEAKS IN A MANN ER APPRVD FOR THIS MATL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CAUTION! COMBUSTIBLE LIQUID. STORE IN
    CLOSED, ORIGINAL CONTAINER IN A COOL, DRY AREA AT 50-90F. AVOID
    STORING LONGER THAN ONE YEAR.
Other Precautions:KEEP AWAY FROM ACIDS, OXIDANTS, HEAT & SOURCES OF
    IGNITION. AVOID SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:THE SPECIFIC RESPIRATOR SELECTED MUST BE BASED
    ON AIRBORNE CONCENTRATION FOUND IN WORKPLACE & MUST NOT EXCEED
    WORKING LIMITS OF RESPIRATOR. THE RESPIRATOR MUST BE NIOSH/MSHA
    APPROVED.
Ventilation:PROVIDE GOOD GEN (MECH) ROOM VENT. SPECIAL LOC EXHST VENT
    IS REC AT POINTS WHERE VAPS CAN BE RELS INTO WORKPLACE AIR.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL GOGGLES.
Other Protective Equipment:SUITABLE PROTECTIVE CLOTHING TO PREVENT SKIN
    CONTACT.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE TO PREVENT
    ACCIDENTAL EXPOSURE.
Supplemental Safety and Health
% VOLAT:100(WT). FIRST AID PROC:DIRECTED AT THE CONTROL OF SYMPTOMS &
    THE CLINICAL CONDITION. WASTE DISP METH:FEDERAL, STATE & LOCAL
    REGULATIONS FOR WASTEWATER DISCHARGE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:396F,202C
Vapor Pres:0.5 @ 25C
Vapor Density:3.4
Spec Gravity:1.03
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:WATER WHITE LIQUID W/MILD AMINE ODOR.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDANTS.
Stability Condition to Avoid:HEAT, SPARKS, FLAME.
Hazardous Decomposition Products:UPON THERMAL DECOMPOSITION MAY EMIT
    TOXIC FUMES, INCLUDING CARBON MONOXIDE & NITROGEN OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DUE TO NATURE OF THIS PROD, DISP OF IT/RESIDUES
    THEREFROM SHOULD BE MADE IN COMPLIANCE W/FED, STATE & LOC ENVIRON
    LAWS. CONT YOUR SHIPLEY TECHNICAL REPRESENTATIVE FOR MORE INFO. IT
    IS YOUR RESPONSIBIL ITY TO VERIFY THAT ANY REC PROCS
    COMPLYW/(SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.