adverstisement



SANFORD CORP -- T.E.C. TRACE ELEMENT CERTIFIED PERMANENT (S -- 7520-00N035401
=====================  Product Identification  =====================

Product ID:T.E.C. TRACE ELEMENT CERTIFIED PERMANENT (S
MSDS Date:04/28/1987
FSC:7520
NIIN:00N035401
MSDS Number: BQGGB
=== Responsible Party ===
Company Name:SANFORD CORP
Address:2740 WASHINGTON BLVD
City:BELLWOOD
State:IL
ZIP:60104
Country:US
Info Phone Num:312-547-6650
Emergency Phone Num:312-547-6650
CAGE:86874
=== Contractor Identification ===
Company Name:SANFORD CORPORATION
Address:2740 WASHINGTON BLVD.
Box:City:BELLWOOD
State:IL
ZIP:60104
Country:US
Phone:1-800-323-0749
CAGE:86874

=============  Composition/Information on Ingredients  =============

Ingred Name:DYES

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENE (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM;150 STEL
ACGIH TLV:100 PPM;150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
    UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
    1500. NEITHER THE PRODUCT NOR ANY OF THE INGREDIENTS HAS BEEN FOUND
    TO BE A CARCINOGEN POTENTIAL  CARCINOGEN BY NTP, IARC, OR OSHA. THE
    PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:TOLUENE (108-88-3) APPEARS ON THE NAVY LISTING
    OF OCCUPATIONAL REPRODUCTIVE HAZARDS. SEEK CONSULTATION FROM
    APPROPRIATE HEALTH PROFESSIONALS CONCERNING LATEST HAZARD LIST
    INFORMATION AND SAFE HANDLING  AND EXPOSURE RECOMMENDATIONS .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH WITH POTABLE WATER FOR A MINIMUM OF
    15 MIN. SEEK ASSISTANCE FROM MD. SKIN: FLUSH WITH COPIOUS AMOUNTS
    OF WATER. SEE MD . INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING
    (GI VE O*2/ARTF RESP) INGEST: GET MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point:<73F,<23C
Lower Limits:1%
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
    SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
    MARKER WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE UNDER NORMAL USE CONDITIONS. NIOSH/MSHA
    APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES 
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: MARKERS FINE TIP/BROAD TIP BLACK.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:232F,111C
Vapor Pres:22 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:< WATER
Evaporation Rate & Reference:SLOWER THAN ETHER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISCARD AS SOLID WASTE. DISPOSAL MUST BE IN
    ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.