adverstisement



DEERE & CO -- GL5 GEAR LUBRICANT (SAE 80W/90), TY6252 -- 9150-00N058015
=====================  Product Identification  =====================

Product ID:GL5 GEAR LUBRICANT (SAE 80W/90), TY6252
MSDS Date:02/15/1989
FSC:9150
NIIN:00N058015
MSDS Number: BWZDJ
=== Responsible Party ===
Company Name:DEERE & CO
Address:JOHN DEERE RD
City:MOLINE
State:IL
ZIP:61265
Country:US
Info Phone Num:800-822-8262
Emergency Phone Num:800-822-8262
CAGE:4X159
=== Contractor Identification ===
Company Name:DEERE & CO
Address:JOHN DEERE RD
City:MOLINE
State:IL
ZIP:61265
Country:US
Phone:800-822-8262
CAGE:4X159

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENT REFINED, HYDROTREATED RESIDUAL OIL
CAS:64742-57-0
Fraction by Wt: 40-90%
OSHA PEL:5 MG/MG (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DDEWAXED
    (SEVERE), HEAVY PARAFFINIC (SOLVENT REFINED, HYDROTREATED (ING 3)
CAS:64742-65-0
RTECS #:PY8038501
Fraction by Wt: 5-30%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ING 2:DEWAXED HEAVY PARAFFINIC DIST.)
RTECS #:9999999ZZ

Ingred Name:MINERAL OIL,HYDROTREATED (SEVERE), HEAVY NAPHTHENIC
    DISTILLATE; (SEVERLY HYDROTREATED HEAVY NAPHTHENIC DISTILLATE)
CAS:64742-52-5
RTECS #:PY8035001
Fraction by Wt: 10-40%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:POLYMERIC ADDITIVE IN OIL (POLY-METHACRYLATE)
Fraction by Wt: 10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE TO VAPORS OR MISTS OF THIS
    PRODUCT MAY CAUSE MILD UPPER RESPIRATORY TRACT IRRITATION.
    PROLONGED OR REPEATED CONTACT MAY CAUSE VARIOUS SKIN DISORDERS SUCH
    AS DERMATITIS, OIL ACNE, OR FOLLICULI TIS. EYE CONTACT IS MINIMALLY
    IRRITATING. EFFECTS OF INGESTION ARE EXPECTED TO BE RELATIVELY
    NON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND RESPIRATORY
    DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:REMOVE
    CONTAMINATED CLOTHING; WASH SKIN WITH SOAP AND WATER; IF MATERIAL
    IS INJECTED UNDER SKIN, DO NOT WAIT FOR SYMPTOMS TO DEVELOP-GET
    MEDICAL ATT ENTION PROMPTLY TO PREVENT SERIOUS DAMAGE.
    INHALATION:REMOVE VICTIM TO FRESH AIR AND PROVIDE OXYGEN IF
    BREATHING IS DIFFICULT. INGESTION:DO NOT INDUCE VOMITING. IN ALL
    CASES SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:360F,182C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE, OR
    HALOGENATED AGENTS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . DO NOT USE DIRECT STREAM OF WATER. PROD WILL FLOAT & CAN BE
    REIGNITED ON SURF OF WATER. COOL FIRE (SUPDAT)
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE & CNTN. USE VACUUM/AN ABSORB SUCH AS
    CLAY/SAND TO PICK UP. FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE.
    NOTE:PROD IS CLASSIFIED AS AN OIL UNDER CLEAN WATER ACT. SPILLS,
    ENTERING SURF WATERS/ANY WA TERCOURSE/SEWER LEADING TO SURF
    WATERS,(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
    ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAME. KEEP AWAY FROM
    CHILDREN. MINIMIZE SKIN CONTACT.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. PROPERLY
    DISPOSE OF CONTAMINATED ARTICLES INCLUDING SHOES THAT CANNOT BE
    CLEANED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED AS NEEDED.
Ventilation:LOCAL EXHAUST TO KEEP TLV/PEL BELOW ACCEPTABLE LEVELS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
    SMOKING, OR USING TOILET FACILITIES.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOSED CONTAINERS WITH WATER. HAZ DECOMP
    PRODS:COMBUSTION. OXIDES OF CARBON, SULFUR, PHOSPHOROUS, AND OTHER
    UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED. SPILL PROC:MUST BE
    REPORTED T O THE NATIONAL RESPONSE CENTER 800-424-9802.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>700F,>371C
Spec Gravity:0.90 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID/PETROLEUM ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID OPEN FLAME, AND OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DEPENDENT ON COMBUST CNDTNS. COMPLEX
    MIX OF AIRBORNE SOLID LIQ & GAS WILL EVOLVE WHEN MATL UNDERGOES
    PYROLYSIS/(SUP DAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORD WITH FEDERAL, STATE AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.