adverstisement



CLIFTON ADHESIVE INC -- FA-1030 NEUTRAL -- 8040-00-515-2246
=====================  Product Identification  =====================

Product ID:FA-1030 NEUTRAL
MSDS Date:09/14/1988
FSC:8040
NIIN:00-515-2246
Kit Part:Y
MSDS Number: BJQCJ
=== Responsible Party ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PLACE
City:WAYNE
State:NJ
ZIP:07474-0832
Country:US
Info Phone Num:201-694-0845
Emergency Phone Num:201-694-0845
CAGE:79833
=== Contractor Identification ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PL
Box:City:WAYNE
State:NJ
ZIP:07470
Country:US
Phone:201-694-0845; 973-694-0845
CAGE:79833

=============  Composition/Information on Ingredients  =============

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 34%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:RUBBER SOLVENT
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 36%
Other REC Limits:NONE SPECIFIED
ACGIH TLV:400 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NAUSEA AND/OR NARCOSIS. MAY CAUSE
    NERVE DAMAGE.
Effects of Overexposure:IRRITATION TO EYES AND MUCOUS MEMBRANES.
    DRYNESS AND CRACKING OF SKIN. LIQUID INGESTION MAY CAUSE VOMITING.
    NUMBNESS, TINGLING AND WEAKNESS OF ARMS OR LEGS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH WITH SOAP AND WATER. REFER TO PHYSICIAN IF
    IRRITATION PERSISTS. EYS:FLUSH EYES ABUNDANTLY WITH CLEAN WATER AND
    REFER TO A PHYSICIAN. INGESTION:DO NOT INDUCE VOMITING. REFER TO A
    PHYSICIAN. E XCESSIVE INHALATION:REMOVE PATIENT TO FRESH AIR OR
    GIVE OXYGEN. USE CPR IF PATIENT IS NOT BREATHING. REFER TO
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:< 0F/<- 18C
Lower Limits:0.9
Upper Limits:8.0
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA SHOULD BE WORN. USE
    WATER SPRAY TO COOL FIRE-EXPOSED STRUCTURES AND DISPERSE
    VAPOR-CLOUD IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
    CONSIDERABLE DISTANCE TO A SOURCE OF IGNITION AND FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
    OIL-DRI OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
    CONTAINER  AND COVER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED AND
    STORE IN APPROVED SOLVENT STORAGE AREA. KEEP AWAY FROM OPEN FLAME,
    HEAT, SPARKS, HOT SURFACES AND OXIDIZING AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH-APPROVED ATMOSPHERE SUPPLYING OR AIR
    PURIFYING RESPIRATOR FOR ORGANIC VAPORS AS REQUIRED TO MAINTAIN
    EXPOSURE LEVELS BELOW RECOMMENDED LIMITS.
Ventilation:LOCAL:REMOVE VAPORS DURING
    PROCESSING.MECHANICAL:EXPLOSION-PROOF EQUIP.SPECIAL:REDUCE VAPOR
    CONCENTRATIONS BELOW LIMITS.
Protective Gloves:PVA GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
    SKIN CONTACT.
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
    PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:152F,67C
Vapor Pres:76 @ 20C
Vapor Density:3.0
Spec Gravity:0.864
Appearance and Odor:TRAN. AROMATIC RUBBERY ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES, SPARKS AND HOT
    SURFACES.
Hazardous Decomposition Products:OXIDES OF CARBON, ZINC, MAGNESIUM,
    SULFUR AND HYDROGEN CHLORIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.