adverstisement



CLIFTON ADHESIVE INC -- FA-1030 ACCELERATOR -- 8040-00-515-2246
=====================  Product Identification  =====================

Product ID:FA-1030 ACCELERATOR
MSDS Date:01/16/1989
FSC:8040
NIIN:00-515-2246
Kit Part:Y
MSDS Number: BJQCK
=== Responsible Party ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PLACE
City:WAYNE
State:NJ
ZIP:07474-0832
Country:US
Info Phone Num:201-694-0845
Emergency Phone Num:201-694-0845
CAGE:79833
=== Contractor Identification ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PL
Box:City:WAYNE
State:NJ
ZIP:07470
Country:US
Phone:201-694-0845; 973-694-0845
CAGE:79833

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ALCOHOL (METHANOL)  (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 76%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:TRIMENE BASE
CAS:63512-71-0
Fraction by Wt: 24%
Other REC Limits:IRRITANT

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NAUSEA AND/OR NARCOSIS. MAY DAMAGE
    LIVER.
Effects of Overexposure:IRRITATION TO EYES AND MUCOUS MEMBRANES. CAN
    ALSO CAUSE SKIN DRYNESS AND CRACKING. CAN CAUSE BLINDNESS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS AND LIVER
    AILMENTS.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION.
    EYES:FLUSH ABUNDENTLY WITH CLEAN WATER AND REFER TO PHYSICIAN.
    INGESTION:INDUCE VOMITING. REFER TO PHYSICIAN. EXCESSIVE
    INHALATION:REMOVE PATIENT  TO FRESH AIR OR GIVE OXYGEN. USE CPR
    IFPATIENT IS NOT BREATHING. REFER TO PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:54F/12C
Lower Limits:5.5
Upper Limits:36.5
Extinguishing Media:CO2, FOAM AND DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA SHOULD BE WORN.USE
    WATER SPRAY TO COOL FIRE EXPOSED STRUCTURES AND DISPERSE VAPOR
    CLOUD IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
    CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
    OIL-DRI OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
    CONTAINER AND COVER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
    AREA. KEEP TIGHTLY CLOSED. KEEP AWAY FROM HEAT, OPEN FLAMES,
    SPARKS, HOT SURFACES AND OXIDIZING AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH-APPROVED ATMOSPHERE SUPPLYING OR AIR
    PURIFYING RESPIRATOR FOR ORGANIC VAPORS AS REQUIRED TO MAINTAIN
    EXPOSURE LEVELS BELOW RECOMMENDED LIMITS.
Ventilation:LOCAL:REMOVE VAPORS DURING
    PROCESSING.MECHANICAL:EXPLOSION-PROOF EQUIP.SPECIAL:REDUCE VAPOR
    CONCENTRATIONS BELOW LIMITS.
Protective Gloves:PVA GLOVES
Eye Protection:GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
    SKIN CONTACT.
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
    PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
EXPOSURE LIMITS ARE FOR AIR LEVELS ONLY. WHEN SKIN CONTACT OCCURS,
    OVEREXPOSURE MAY RESULT THOUGH AIR LEVELS ARE LESS THAN LIMITS
    TESTED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:147F,64C
Vapor Pres:97.7 @ 68F
Vapor Density:1.11
Spec Gravity:0.851
Appearance and Odor:AMBER, PUNGENT ALCOHOLIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES, SPARKS AND HOT
    SURFACES.
Hazardous Decomposition Products:AMMONIA AND HYDROGEN CHLORIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.