adverstisement



INTERNATIONAL PAINT CO INC -- INTERGARD HS UNIV. EPOXY LTC REACTOR FCA321 -- 8010-01-268-7584
=====================  Product Identification  =====================

Product ID:INTERGARD HS UNIV. EPOXY LTC REACTOR FCA321
MSDS Date:10/03/1991
FSC:8010
NIIN:01-268-7584
Kit Part:Y
MSDS Number: BQCZQ
=== Responsible Party ===
Company Name:INTERNATIONAL PAINT CO INC
Address:2270 MORRIS AVE
Box:386
City:UNION
State:NJ
ZIP:07083-0386
Country:US
Info Phone Num:713-682-1711
Emergency Phone Num:713-682-1711
CAGE:26351
=== Contractor Identification ===
Company Name:INTERNATIONAL PAINT INC
Address:6001 ANTOINE DR
Box:City:HOUSTON
State:TX
ZIP:77091
Country:US
Phone:800-589-1267/800-854-6813
CAGE:26351

=============  Composition/Information on Ingredients  =============

Ingred Name:BENZYL ALCOHOL (BENZENEMETHANOL) (VAPOR PRESSURE 0.1 MM HG
    @ 20 C)
CAS:100-51-6
RTECS #:DN3150000
Fraction by Wt: 10-15%
Other REC Limits:NONE SPECIFIED

Ingred Name:METHYL N-AMYL KETONE  (2-HEPTANONE) (VAPOR PRESSURE 2.1 MM
    HG @ 20 C)
CAS:110-43-0
RTECS #:MJ5075000
Fraction by Wt: 10-15%
Other REC Limits:NONE SPECIFIED
OSHA PEL:50 PPM
ACGIH TLV:50 PPM

Ingred Name:MINERAL SPIRITS (LIGROINE)	(VAPOR PRESSURE 7.0 MM HG @ 20
    C)
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: 1-5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100.00 PPM
ACGIH TLV:100.00 PPM

Ingred Name:DIETHYLENETRIAMINE (1,2-ETHANDIAMN N-(2-AMNTHYL) (VAPOR
    PRESSURE 0.1 MM HG @ 20 C)
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: 1-5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1.00 PPM
ACGIH TLV:1.00 PPM

Ingred Name:AMINE COMPOUND (PROPRIETARY)
Fraction by Wt: 35-40%
Other REC Limits:NONE SPECIFIED

Ingred Name:POLYAMINE ADDUCT (PROPRIETARY)
Fraction by Wt: 15-20%
Other REC Limits:NONE SPECIFIED

Ingred Name:ALKYL GLYCIDYL ETHER  (VAPOR PRESSURE 0.6 MM HG @ 20 C)
CAS:68081-84-5
Fraction by Wt: 15-20%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYES: EXTREMELY IRRITATING. LIQUID CAUSES EYE
    BURNS. SKIN: MAY CAUSE BURNS, SENSITIZATION/OTHER ALLERGIC
    RESPONSES. INHALATION: IRRITATION OF RESPIRATORY TRACT. HEADACHE
    AND DIZZINESS AND UNCONSCIOUSN ESS. INGESTION: GASTROINTESTINAL
    IRRITATION, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
    15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: REMOVE
    CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP & WATER.
    LAUNDER CLOTHES B EFORE REUSE. INHALATION: REMOVE TO FRESH AIR.
    GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
    INGESTION: CALL A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
    TO INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:106F,41C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ABOVE EXTINGUISHING MEDIA.
    MAY USE WATER TO COOL UNOPEN CNTNR-BUT NOT AS EXTINGUISHING MEDIA.
    CLOSED CONTAINER MAY EXPLODE.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
    AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
    EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
    MATERIALS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN BUILDING FOR LIQUIDS WITH
    NFPA CLASS GIVEN BY OSHA CLASS IN SECTION 4. AVOID BREATHING DUST
    FROM SANDING SURFACES COATED WITH THIS PRODUCT.
Other Precautions:CHRONIC OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS
    BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR/OPEN AREAS-USE NIOSH APPROV FILTER
    RESP TO REMOVE SOLID AIR-BORNE PARTICLES OF OVERSPRAY DURING
    APPLICATION. IN RESTRICT AREAS-USE NIOSH APPROV RESP IN ACCORD W/29
    CFR 1910.134 TO REMOVE A  COMBINATION OF PARTICULATES & VAPORS.
Ventilation:PROVIDE SUFFICIENT VENTILATION  PATTERN, TO KEEP TLV AND
    LEL OF HAZARDOUS INGREDIENTS BELOW LIMITS
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLE/FACE SHLD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
    CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
    WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F5
Boiling Pt:B.P. Text:200-482F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:16%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
    SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
    FRAGMENTS, NITROGEN COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.