adverstisement



TERAND INDUSTRIES INC -- BELT DRESSING, 792 -- 9150-00N078677
=====================  Product Identification  =====================

Product ID:BELT DRESSING, 792
MSDS Date:08/03/1995
FSC:9150
NIIN:00N078677
MSDS Number: CFHYJ
=== Responsible Party ===
Company Name:TERAND INDUSTRIES INC
Box:9947
City:FT LAUDERDALE
State:FL
ZIP:33310
Country:US
Info Phone Num:305-974-5440
Emergency Phone Num:800-255-3924
CAGE:OO296
=== Contractor Identification ===
Company Name:TERAND INDUSTRIES, INC.
Box:9947
City:FT. LAUNDERDALE
State:FL
ZIP:33310
Phone:305-974-5440
CAGE:OO296

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPARAFFINIC HYDROCARBON
CAS:64741-66-8
Fraction by Wt: 40-60%
OSHA PEL:400 PPM (MFR)
ACGIH TLV:400 PPM (MFR)

Ingred Name:LPG; (LIQUEFIED PETROLEUM GAS)
CAS:68476-85-7
RTECS #:SE7545000
Fraction by Wt: 40-60%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE SLIGHT
    IRRITATION BUT DOES NOT INJURE EYE TISSUE. SKIN: FREQUENT OR
    PROLONGED CONTACT MAY CAUSE IRRITATION. INHALATION: INHALATION OF
    MIST CAN CAUSE IRRITATION OF NASAL AND RESP IRATORY PASSAGES.
    ABUSIVE OR EXCESSIVE INHALATION MAY CAUSE IRRITATION TO THE UPPER
    RESPIRATORY (EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: TRACT, DIZZINESS, NAUSEA AND OTHER
    CENTRAL NERVOUS SYSTEM EFFECTS. INGESTION: CAN CAUSE
    GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING AND DIARRHEA.
    ASPIRATION OF MATERIAL INTO THE LUNGS CAN  CAUSE CHEMICAL
    PNEUMONITIS. MINIMAL TOXICITY. CHRONIC: NONE SPECIFIED BY
    MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF COOL RUNNING WATER FOR AT
    LEAST 15 MINUTES WHILE HOLDING UPPER & LOWER LIDS OPEN. IF IRRIT
    PERSISTS, GET MEDICAL ATTENTION IMMED. SKIN: WASH W/SOAP & WATER.
    IF IRRIT PER SISTS SEEK MEDICAL ATTENTION. INHAL: REMOVE TO FRESH
    AIR. SEEK MEDICAL ATTENTION IMMED. IF BREATHING STOPS GIVE
    ARTIFICIAL RESPIRATION. INGEST: DO NOT INDUCE VOMITING. SEEK
    MEDICAL ATTENTION IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:45.0F,7.2C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY MEDIA.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL FIRE-EXPOSED CONTAINERS TO PREVENT RUPTURING.
Unusual Fire/Explosion Hazard:EXPOSURE TO TEMPERATURE ABOVE 120F MAY
    CAUSE BURSTING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ALLOW PROPELLANT TO EVAPORATE. MAINTAIN LOCAL
    EXHAUST & ADEQUATE VENTILATION. NO SMOKING. KEEP SPARKS, HEAT
    SOURCES & OPEN FLAME FAR AWAY FROM SPILL/LEAK. COVER W/ABSORBENT
    MATERIAL & SWEEP UP. WASH A REA TO PREVENT SLIPPING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. FOR
    INDUSTRIAL AND INSTITUTIONAL USE ONLY. STORE IN A COOL, DRY AREA
    AWAY FROM HEAT OR OPEN FLAME.
Other Precautions:DO NOT STORE AT TEMPERATURES ABOVE 120F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED FOR PROPER USE IN ACCORDANCE WITH
    LABEL DIRECTIONS. USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:PROVIDE LOCAL EXHAUST TO KEEP TLV OF INGREDIENTS BELOW
    ACCEPTABLE LIMITS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:300F,149C
Vapor Pres:50 PSIG
Vapor Density:>1
Volatile Org Content %:80
Spec Gravity:0.745 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:TRANSPARENT LIQUID, SOLVENT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF SOAKED ABSORBENT MATERIAL I/A/W
    FEDERAL, STATE & LOCAL LAWS. AEROSOL CANS, WHEN EMPTIED &
    DEPRESSURIZED THROUGH NORMAL USE, POSE NO DISPOSAL HAZARD & SHOULD
    BE RECYCLED. CONSULT FEDERAL, ST ATE & LOCAL AUTHORITIES FOR
    APPROVED PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.