adverstisement



UOP INC -- UNICOR TYPE J CORROSION INHIBITOR -- 6850-00-292-9780
=====================  Product Identification  =====================

Product ID:UNICOR TYPE J CORROSION INHIBITOR
MSDS Date:10/01/1995
FSC:6850
NIIN:00-292-9780
MSDS Number: BXCNN
=== Responsible Party ===
Company Name:UOP INC
Address:25 E ALGONQUIN RD
City:DES PLAINES
State:IL
ZIP:60017-5017
Country:US
Info Phone Num:708-391-2123
Emergency Phone Num:708-391-2123/800-424-9300(CHEMTREC)
CAGE:02QC3
=== Contractor Identification ===
Company Name:UOP LLC
Address:25 E ALGONQUIN RD
Box:City:DES PLAINES
State:IL
ZIP:60017-5017
Country:US
Phone:847-391-3189 FAX: 847-391-2953
CAGE:02QC3

=============  Composition/Information on Ingredients  =============

Ingred Name:FATTY ACIDS, DIMERS
CAS:61788-89-4
Fraction by Wt: 55-65%
Other REC Limits:NONE RECOMMENDED

Ingred Name:AROMATIC HYDROCARBON (HEAVY AROMATIC NAPHTHA (SOLVENT
    NAPHTHA))
CAS:64742-94-5
RTECS #:WF3100000
Fraction by Wt: 35-45%
Other REC Limits:NONE RECOMMENDED

Ingred Name:NAPHTHALENE (SARA 313) (CERCLA)
CAS:91-20-3
RTECS #:QJ0525000
Fraction by Wt: <4.5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:10 PPM
ACGIH TLV:10 PPM/15 STEL; 9495
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 = 5GM/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:UNKNOWN	  IARC:UNKNOWN	  OSHA:NO
Health Hazards Acute and Chronic:PROLONGED &/OR REPEATED SKIN
    CONTACT:MAY CAUSE IRRITATION. CONSIDERED LOW DERMAL TOXICITY.
    EYES:MAY CAUSE IRRITATION. INHALATION:PROLONGED &/OR REPEATED
    INHALATION MAY CAUSE IRRITATION OF RESPIRATORY  TRACT. INHALATION
    OF HIGH SOLVENT VAPORS MAY CAUSE HEADACHE, DIZZINESS, DROWSINESS,
    CNS EFFECTS. INGESTION:LOW TOXICITY.
Explanation of Carcinogenicity:NONE OF THE COMPONENTS HAVE BEEN
    EVALUATED BY IARC OR NTP.
Effects of Overexposure:PROLONGED &/OR REPEATED SKIN
    CONTACT:IRRITATION. EYES:IRRITATION. INHALATION:PROLONGED &/OR
    REPEATED INHALATION;IRRITATION OF RESPIRATORY TRACT, HEADACHE,
    DIZZINESS, DROWSINESS, CNS EFFECTS.
Medical Cond Aggravated by Exposure:MFR GAVE NO INFORMATION OF MSDS.

=======================  First Aid Measures  =======================

First Aid:IF IRRITATION PERSISTS OR IS SEVERE, GET MEDICAL ATTENTION.
    EYE:FLUSH W/WATER FOR 15 MIN. SKIN:CLEAN AREA OF CONTACT TWICE
    W/WATERLESS HAND CLEANER. WASH W/SOAP & WATER. INHALED:REMOVE FROM
    EXPOSURE.  AID OR RESTORE BREATHING AS NEEDED. INGESTED:DO NOT
    INDUCE VOMITING. GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:165F,74C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:MFR GAVE NO INFORMATION OF MSDS.
Unusual Fire/Explosion Hazard:MAY PRODUCE IRRITATING OR POISONOUS
    GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ISOLATE AREA AND ELIMINATE ALL SOURCES OF
    IGNITION. CONTAIN SPILL WITH TRENCHING OR DIKING. ONLY TRAINED
    PERSONNEL ENTER SPILL AREA. WORK UPWIND OF SPILL. ABSORB WITH INERT
    MATERIAL AND PLACE IN A CON TAINER FOR LATER DISPOSAL.
Neutralizing Agent:MFR GAVE NO INFORMATION OF MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED, PROPERLY
    LABELED CONTAINERS IN A COOL, WELL-VENTILATED AREA AWAY FROM
    SOURCES OF IGNITION AND INCOMPATIBLE MATERIALS.
Other Precautions:AVOID INHALATION OF VAPORS. AVOID CONTACT WITH SKIN
    AND EYES. DO NOT TAKE INTERNALLY. NEVER USE WELDING OR CUTTING
    TORCH ON OR NEAR DRUM (EVEN EMPTY) BECAUSE MATERIAL (EVEN RESIDUE)
    CAN IGNITE EXPLOSI VELY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN VENTILATION OR ENGINEERING CONTROL IS
    INADEQUATE, USE AN APPROVED RESPIRATOR FITTED W/ORGANIC VAPOR
    CARTRIDGES TO PREVENT INHALATION OF VAPORS.
Ventilation:WHEN NATURAL VENTILATION IS INADEQUATE, USE MECHANICAL
    VENTILATION OR OTHER ENGINEERING CONTROLS.
Protective Gloves:PROTECTIVE GLOVES
Eye Protection:CHEMICAL GOGGLES OR SAFETY GLASSES
Other Protective Equipment:MFR GAVE NO INFORMATION OF MSDS.
Work Hygienic Practices:MFR GAVE NO INFORMATION OF MSDS.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:V4
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:>270F,>132C
Vapor Pres:<10 MM
Vapor Density:>1
Spec Gravity:0.93
Viscosity:85SUS(17CST)
Solubility in Water:NIL
Appearance and Odor:AMBER COLORED LIQUID; HYDROCARBON ODOR.
Percent Volatiles by Volume:40

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REACTIVE W/STRONG MINERAL ACIDS, STRONG ALKALIS.
Stability Condition to Avoid:THERMAL DECOMPOSITION, INCOMPATIBLE
    MATERIALS.
Hazardous Decomposition Products:CARBON MONOXIDE, OXIDES OF NITROGEN,
    OTHER IRRITATING OR POISONOUS GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL WASTE MATERIALS MUST BE HANDLED AND DISPOSED
    OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
    RECOMMENDED DISPOSAL METHODS INCLUDE INCINERATION FOR LIQUID AND
    CONTAMINATED SOLIDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.