adverstisement



BRAY PRODUCTS, CASTROL INC -- CASTROL 5000 -- 9150-00N011401
=====================  Product Identification  =====================

Product ID:CASTROL 5000
MSDS Date:01/03/1989
FSC:9150
NIIN:00N011401
MSDS Number: BJMPT
=== Responsible Party ===
Company Name:BRAY PRODUCTS, CASTROL INC
Address:16715 VON KARMAN AVENUE, SUITE 230
City:IRVINE
State:CA
ZIP:92714
Country:US
Info Phone Num:714-660-9414
Emergency Phone Num:714-660-9414
Preparer's Name:KAREL WRIGHT
CAGE:HO687
=== Contractor Identification ===
Company Name:BRAY PRODUCTS, CASTROL INC
Address:16715 VON KARMAN AVENUE, SUITE 230
Box:City:IRVINE
State:CA
ZIP:92714
Country:US
Phone:714-660-9414
CAGE:HO687
Company Name:CASTROL INDUSTRIAL NORTH AMERICA INC SPECIALTY PRODUCTS
    DIV
Address:1001 WEST 31ST STREET
Box:City:DOWNERS GROVE
State:IL
ZIP:60515-1280
Country:US
Phone:800-621-2661/ FAX: 630-241-4140
CAGE:2R128

=============  Composition/Information on Ingredients  =============

Ingred Name:SYNTHETHIC ESTER BASED LUBRICANT
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY BE A SLIGHT SKIN OR EYE IRRITANT,
    ALTHOUGH BELIEVED TO BE ESSENTIALLY NON-TOXIC. MAY CAUSE
    GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SKIN IRRITATION, DEFATTING, DERMATITIS,
    GASTROINTESTINAL IRRITATION, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE KNOWN

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF CLEAN WATER AT LEAST 15 MIN.
    SKIN:REMOVE CONTAMINATED CLOTHING. WIPE MATERIAL FROM SKIN. WASH
    THOROUGHLY WITH SOAP AND WATER. INHAL:REMOVE FROM AREA OF EXPOSURE.
    ADMIN ISTER OXYGEN IF DEEMED NECESSARY. INGEST:DO NOT INDUCE
    VOMITING, ASPIRATION HAZARD. CONSULT A PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:480F,249C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:USE WATER AS FOG OR SPRAY TO COOL FIRE EXPOSED
    CONTAINERS. USE NIOSH/MSHA SCBA IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:EMPTY CONTAINERS MAY RETAIN PRODUCT
    RESIDUE OR VAPORS WHICH CAN IGNITE EXPLOSIVELY, DO NOT CUT, DRILL
    OR WELD ON OR NEAR FULL OR EMPTY CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DO NOT PERMIT MATERIAL TO ENTER STREAMS,
    SEWERS OR OTHER WATERWAYS. DIKE LARGE SPILLS AND ELIMINATE LEAKS.
    ABSORB WITH DRY INERT MATERIAL AND STORE IN A CLOSED CONTAINER
    UNTIL DISPOSED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:MAINTAIN AMBIENT TEMPS. AVOID
    PRLNGD/RPTD BRTHG OF VAPS, MISTS, FUMES. KEEP CNTNR TIGHTLY CLOSED.
    DO NOT STORE NEAR HEAT, FLAME, STRONG OXIDANTS.
Other Precautions:MAY BE DISPOSED OF BY CONTROLLED INCINERATION.
    MAINTAIN ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL CARTRIDGE
    RESPIRATOR OR SUPPLIED AIR RESPIRATOR.
Ventilation:LOCAL EXHAUST, IN ADDITION TO GENERAL VENTILATION OPTIONAL.
Protective Gloves:IMPERVIOUS GLOVES, SUCH AS NEOPRENE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS GARMENTS AS REQUIRED.
Work Hygienic Practices:DO NOT WEAR CONTAMD CLTHG. LAUNDER BEFORE
    RE-USE. WASH FREQ & THORO DURING CONTACT AND AT END OF WORKSHIFT .
Supplemental Safety and Health
EVAP RATE:@ 6.5 HRS (BUTYL ACETATE = 1)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.98
Evaporation Rate & Reference:4% WT LOSS(SEE SUPP DATA)
Solubility in Water:<0.1%
Appearance and Odor:AMBER FLUID, MILD ODOR.
Percent Volatiles by Volume:<0.1%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, CAUSTIC OR ACIDIC SOLUTIONS.
Stability Condition to Avoid:HEAT, OPEN FLAME.
Hazardous Decomposition Products:SMOKE, FUMES, CO, CO*2, MINOR AMOUNTS
    OF VARIOUS HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL RECOVERED MATL SHOULD BE PACKAGED, LABELED,
    TRANSPORTED, & DISPOSED OF OR RECLAIMED IN CONFORMANCE W/GOOD
    ENGINEERING PRACTICES. DISPOSE OF BY METHOD IN COMPLIANCE W/LOCAL,
    STATE, & FED REGS REGAR DING HEALTH, AIR & WATER POLLUTION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.