adverstisement



SIL-TECH CORPORATION -- ST-22 (200,000) POLYDIMETHYLSILOXANE -- 9150-00-286-8088
=====================  Product Identification  =====================

Product ID:ST-22 (200,000) POLYDIMETHYLSILOXANE
MSDS Date:05/02/1990
FSC:9150
NIIN:00-286-8088
MSDS Number: BDTYM
=== Responsible Party ===
Company Name:SIL-TECH CORPORATION
Address:810 SOUTH MAUMEE STREET
City:TECUMSEH
State:MI
ZIP:49286-0177
Country:US
Info Phone Num:517-423-3113
Emergency Phone Num:517-423-3113
CAGE:4Y322
=== Contractor Identification ===
Company Name:SIL-TECH CORPORATION
Address:810 SOUTH MAUMEE STREET
City:TECUMSEH
State:MI
ZIP:49286-0177
Country:US
Phone:517-423-3113
CAGE:4Y322

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYDIMETHYLSILOXANE
CAS:9016-00-6
RTECS #:TQ2690000
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:NO EVIDENCE OF ADVERSE
    FROM AVAILABLE INFORMATION.
Effects of Overexposure:NO ADVERSE EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR.EYES:IMMEDIATELY FLUSH WITH
    PLENTY OF WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL
    ATTENTION. SKIN:WASH WITH WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:601F,316C
Extinguishing Media:USE CARBON DIOXIDE, ALCOHOL FOAM, OR DRY
    CHEMICAL.DO NOT SPRAY A SOLID STREAM OF WATER DIRECTLY INTO BURNING
    LIQUID.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
    FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
    CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:FLOATING	FIRE HAZARD

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT FOR PROPER DISPOSAL.
Neutralizing Agent:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN
    NOT IN USE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT WITH EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:MECHANICAL
Protective Gloves:PVC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER,WORK
    CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
    FOOTWEAR.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:392F,200C
Vapor Pres:1 MAX
Vapor Density:1 MIN
Spec Gravity:0.969 - 0.977
Evaporation Rate & Reference:1 MAX (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID, SLIGHT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
    OXIDES OF SILICON

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY IN LAND FILL WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.