adverstisement



INTERNATIONAL PAINT (USA) INC. -- INTERGARD HS UNIV RED FPL274 PART A -- 8010-01-268-7584
=====================  Product Identification  =====================

Product ID:INTERGARD HS UNIV RED FPL274 PART A
MSDS Date:08/15/1989
FSC:8010
NIIN:01-268-7584
MSDS Number: BHGCC
=== Responsible Party ===
Company Name:INTERNATIONAL PAINT (USA) INC.
Box:386
City:UNION
State:NJ
ZIP:07083
Country:US
Info Phone Num:713-682-1711
Emergency Phone Num:1-800-854-6813
CAGE:26351
=== Contractor Identification ===
Company Name:INTERNATIONAL PAINT INC
Address:6001 ANTOINE DR
Box:City:HOUSTON
State:TX
ZIP:77091
Country:US
Phone:800-589-1267/800-854-6813
CAGE:26351

=============  Composition/Information on Ingredients  =============

Ingred Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 5-10%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHYL N-AMYL KETONE
CAS:110-43-0
RTECS #:MJ5075000
Fraction by Wt: 1-5%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9192

Ingred Name:EPOXY RESIN
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 20-25%
OSHA PEL:NA
ACGIH TLV:NA

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYES: SEVERE IRRI, REDNESS, TEARING & BLURRED
    VISION. SKIN: IRRI. DERMATITIS. SENSITIZATION OR OTHER ALLERGIC
    RESPONSES. INHAL: IRRI OF RESPIR TRACT. HEADACHE &DIZZINESS &
    UNCONSCIOUSNESS. INGESTION:  GASTROINTESTINAL IRRI, NAUSEA,
    VOMITING& DIARRHEA
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY CONDITIONS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMED W/COPIOUS QUANT OF WTR 15 MIN. GET MED
    ATTN. IMMED. SKIN: REMOVE CONT CLOTHING, WASH SKIN W/PLENTY OF SOAP
    & WATER. LAUNDER CLOTHES BEFORE RE-USE. INHAL: REMOVE TO FRESH AIR.
    GIVE CP R IF NEEDED. GET MED ATTN. INGESTION: CALL A PHYSICIAN
    IMMED TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point:107 F 41.67 C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ABOVE EXTING MEDIA. WTR MAY
    BE USED TO COOL CONT. BUT MUST NOT BE AS EXTING. TAKE CARE TO
    PREVENT SPREAD OF BURNING LIQ. W/WTR. MAY EXPLODE
Unusual Fire/Explosion Hazard:NK UNLESS OTHERWISE NOTED. CONT FAMM
    SOLVENT. SO NOT USE IN AREAS OF SPARK, FLAME PRESENT. CLOSED CONT
    MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCE OF IGNITION. AVOID
    INHALATION OFVAPORS. VENTILATE AREA CLEAN UP WITH ABSORBANT
    MA-TERIALS

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN BLD DESIGNED/PROTECTED FOR
    STORAGE OF LIQW/NFPA CL GIVEN BY OSHA. AVOID BREATHING DUST/CHIPS
    FROM SANDING SURFACES COATED WITH THIS PRODUCT
Other Precautions:NONE KNOWN UNLESS OTHERWISE NOTED. CHRONIC
    OVEREXPOSURE TO AND MISUSE OF, SOLVENTS HAS BEEN LINKED TO
    PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, USE A
    NIOSH APPROVED FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES OF
    OVERSPRAY. RESTRICTED VENT AREA,USE A NIOSH APPROVED RESP TO REMOVE
    A COMBINATION OF PAR TICULATES AND VAPORS
Ventilation:SUFFICIENT VENT IN VOL/PATTERN TO KEEP TLV/LEL OF HAZARD
    INGRED BELOW LIMITS & REMOVE DECOMP PRODUCTS DURING WELDING ETC
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES, CHEM GOGGLES/FACE SHIELD
Other Protective Equipment:APPROPRIATE IMPERVIOUS PROTECTIVE CLOTHING
    TO PREVENT SKIN  CONTACT
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
    WASH HANDS BEFORE EATING OR SMOKING
Supplemental Safety and Health
RECOMMEND GROUNDING & BONDING OF CONTAINERS WHEN TRANSFERRING LIQUID &
    POWDERS  TO AVOID STATIC CHARGE BUILD UP.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:2440300 F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:10

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN UNLESS OTHERWISE NOTED. OXIDIZING AGENTS
Stability Condition to Avoid:NONE KNOWN UNLESS OTHERWISE NOTED. STORE
    AWAY FROM DIRECT HEAT, FLAME OR SPARKS
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON FRAGMENTS
    ALDEHYDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.