adverstisement



SPEX INDUSTRIES INC -- CUSTOM PLASMA STANDARD, PLTI9-2Y -- 6810-00N043870
=====================  Product Identification  =====================

Product ID:CUSTOM PLASMA STANDARD, PLTI9-2Y
MSDS Date:08/10/1992
FSC:6810
NIIN:00N043870
MSDS Number: BVNNK
=== Responsible Party ===
Company Name:SPEX INDUSTRIES INC
Address:3880 PARK AVE
City:EDISON
State:NJ
ZIP:08820
Country:US
Info Phone Num:908-549-7144
Emergency Phone Num:908-549-7144
Preparer's Name:VANAJA SIVAKUMAR
CAGE:07977
=== Contractor Identification ===
Company Name:SPEX CERTIPREP INC
Address:203 NORCROSS AVE
Box:City:METUCHEN
State:NJ
ZIP:08840
Country:US
Phone:732-549-7144
CAGE:07977

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANATE (2-), HEXAFLUORO-, DIAMMONIUM; ((NH*2)*2TIF*6)
CAS:16962-40-6
RTECS #:XR1500000
Fraction by Wt: 0.4-4.0%
OSHA PEL:2.5 MG/M3 (AS F)
ACGIH TLV:2.5 MG/M3 (AS F)

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 90-96%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS SOLN CAN BE HARMFUL IF INGESTED,
    INHALED, OR CONTACTED WITH THE SKIN OR EYES. SKIN OR EYE CONTACT
    CAN BE IRRITATING. INHALATION CAN CAUSE RESP DISTURBANCES. THIS
    MATL IS NOT KNOWN TO CONTAIN ANY  CHEMICAL LISTED AS A CARCINOGEN
    OR SUSPECTED CARCINOGEN AT A CONCENTRATION GREATER THAN 0.1% BY
    OSHA, IARC OR NTP.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/COPIOUS AMTS OF WATER OCCASIONALLY LIFTING
    UPPER & LOWER EYELIDS FOR AT LEAST 15 MIN. SKIN: REMOVE CONTAM
    CLTHG, THEN FLUSH W/WATER FOR AT LEAST 15 MIN. WASH CONTAM CLTHG
    THORO BEFORE RE USE. INHAL:MOVE TO FRESH AIR. INGEST: DO NOT INDUCE
    VOMITING. GET IMMED MED HELP. IF THE PATIENT IS CONSCIOUS, GIVE A
    LARGE QUANTITY OF WATER OR MILK. IF IRRIT CONTINUES, GET MED ATTN
    IMMED.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:APPROPRIATE TO SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENT AREA. DILUTE SPILL W/WATER. WIPE UP & PUT
    INTO A SEALED CNTNR FOR PROPER DISP. WASH SPILL SITE OFF W/WATER
    AFTER MATL PICKUP IS COMPLETE. WEAR CHEMICAL RESISTANT GLASSES,
    GLOVES & CLOTHING. WEAR  NIOSH/MSHA APPROVED RESPIRATOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
    TIGHTLY SEALED WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:CHEMICAL FUME HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES 
Other Protective Equipment:LAB COAT. HAVE IMMEDIATE AVAILABILITY OF AN
    EYE WASH IN CASE OF EMERGENCY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MATLS TO AVOID: DESTRUCTION OF THE GLASS MAY RESULT.

==================  Physical/Chemical Properties  ==================

HCC:T6
Spec Gravity:1
Solubility in Water:SOLUBLE
Appearance and Odor:TRANSPARENT WITHOUT AN ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG ACIDS. SINCE FLUORIDES ARE PRESENT IN
    THIS SOLN, AVOID CNTCT W/GLASS SINCE (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NITROGEN OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
    DISPOSAL AGENCY FOR REGULATIONS. DISPOSAL MUST BE IN ACCORDANCE
    WITH FEDERAL, STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.