CIBA-GEIGY CORPORATION-PLASTICS & ADDITIVES DIV. -- RP 1126 RESIN PART A -- 8030-01-059-4112
=====================  Product Identification  =====================

Product ID:RP 1126 RESIN PART A
MSDS Date:11/13/1985
FSC:8030
NIIN:01-059-4112
Kit Part:Y
MSDS Number: BHFDH
=== Responsible Party ===
Company Name:CIBA-GEIGY CORPORATION-PLASTICS & ADDITIVES DIV.
Address:THREE SKYLINE DRIVE
City:HAWTHORNE
State:NY
ZIP:10532
Country:US
Info Phone Num:800-334-9481 (AFTER HOURS)
Emergency Phone Num:914-347-4700 (SAFETY & HEALTH)
Preparer's Name:M. MUNSELL
CAGE:CIBAG
=== Contractor Identification ===
Company Name:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
Company Name:CIBA-GEIGY CORPORATION, FURANE PRODUCTS
Address:5121 SAN FERNANDO ROAD WEST
City:LOS ANGELES
State:CA
ZIP:90039
Country:US
Phone:818-247-6210
CAGE:CIBAG

=============  Composition/Information on Ingredients  =============

Ingred Name:BENTONITE (AS NUISANCE DUST OR PARTICULATES NOT OTHERWISE
    REGULATED)
CAS:1302-78-9
RTECS #:CT9450000
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG/M3 TDUST;8990

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192

Ingred Name:C12 AND C14 ALKYL GLYCIDYL ETHERS
CAS:68609-97-2

Ingred Name:DIGLYCIDYL ETHER OF BISPHENOL A
CAS:25068-38-6

Ingred Name:PARA-IERTIARY BUTYLPHENYL GLYCIDYL ETHER
CAS:23101-60-8

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYES:  MAY CAUSE IRRITATION.  SKIN:  MAY CAUSE
    IRRITATION OR ALLERGIC REACTION. INHALATION:  MAY CAUSE RESPIRATORY
    REACTION.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS

=======================  First Aid Measures  =======================

First Aid:EYES:  IMMEDIATELY FLUSH EYES W/WATER FOR 15 MINUTES.  CALL
    PHYSICIAN.	SKIN:	WASH W/SOAP AND WATER.	REMOVE CONTAMINATED
    CLOTHING & LAUNDER BEFORE RE-USE.	INGESTION:  IF CONSCIOUS, GIVE
    PLENTY OF  WATER TO DRINK.	INDUCE VOMITING BYTOUCHING BACK OF
    THROAT W/FINGER.  CALL A PHYSICIAN.  INHALATION:  REMOVE TO   
    FRESH AIR.	GIVE OXYGEN AND/OR ARTIFICIAL RESPIRATION,IF
    NEEDED.CALL A DOCTOR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:210F/99C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
    MATERIAL

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH EYES, SKIN, AND
    CLOTHING.	   AVOID PROLONGED OR REPEATED CONTACT W/SKIN.	WASH
    THOROUGHLY AFTER HANDLING.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR SAWING
    CURED MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
    RESPIRATOR WHEN VAPOR/MIST		 EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL AND LOCAL EXHAUST IN ACCORDANCE WITH    
    ACGIH RECOMMENDATIONS.
Protective Gloves:WEAR IMPERMEABLE GLOVES
Eye Protection:WEAR SPLASH-PROOF CHEMICAL GOGGLES
Supplemental Safety and Health
REFERRAL TO A PHYSICIAN IS RECOMMENDED IF THERE IS ANY QUESTION ABOUT
    THE       SERIOUSNESS OF ANY INJURY.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.47-1.50
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE, MILD COLOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND BASES
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
    TIME
Hazardous Decomposition Products:COMBUSTION MAY FORM TOXIC MATERIALS,
    SUCH AS CARBON DIOXIDE,CARBON MONOXIDE
Conditions to Avoid Polymerization:EXCESSIVE HEAT FOR PROLONGED PERIODS
    OF TIME

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
    FORMETHOD THAT WILL COMPLY WITH LOCAL, STATE AND	 FEDERAL HEALTH
    AND ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.