adverstisement



BIDDLE CO -- BUTYLGRIP SEALANT -- 8030-00N047838
=====================  Product Identification  =====================

Product ID:BUTYLGRIP SEALANT
MSDS Date:11/01/1991
FSC:8030
NIIN:00N047838
MSDS Number: BSTPD
=== Responsible Party ===
Company Name:BIDDLE CO
Address:2817 BRECKENRIDGE IND CT
City:ST LOUIS
State:MO
ZIP:63144
Country:US
Info Phone Num:314-962-9350
Emergency Phone Num:314-962-9350
CAGE:88448
=== Contractor Identification ===
Company Name:BIDDLE CO
Address:2817 BRECKENRIDGE IND CT
Box:City:ST LOUIS
State:MO
ZIP:63144
Country:US
Phone:314-962-9350
CAGE:88448

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MINERAL
    SPIRITS). VP:8 @ 38.7C.
CAS:64742-88-7
Fraction by Wt: <20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SYMPTOMS OF OVEREXPOSURE INCLUDE
    DIZZINESS, INTOXICATION W/EUPHORIA LEADING TO UNCONSCIOUSNESS.
    SOLVENT PORTION, LIKE ALL PETROLEUM DISTILLATES, ARE CENTRAL
    NERVOUS SYSTEM DEPRESSANTS. NOSE & THROAT I RRITATION MAY OCCUR
    FROM INHALATION. PROLONGED OR REPEATED SKIN CONTACT WILL CAUSE
    DEFATTING & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DERMATITIS. EYE CONTACT W/LIQUID CAN
    CAUSE CONJUNCTIVITIS.
Medical Cond Aggravated by Exposure:UNKNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. RESTORE BRTHG. TREAT
    SYMPTOMATICALLY. CONSULT MD. EYES:FLUSH IMMED W/LG AMTS OF WATER
    FOR AT LST 15 MINS. TAKE TO MD FOR MEDICAL TREATMENT. SKIN:WASH
    AFFECTED AREA W/SOAP &  WATER. REMOVE CONTAMINATED CLOTHING.
    CONSULT MD IF IRRITATION PERSISTS. INGEST:DRINK 1-2 GLASSES OF
    WATER TO DILUTE. DO NOT INDUCE VOMIT. CONSULT MD/POIS CTL CTR
    IMMED. TREAT SYMPTOMATICALLY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1.1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
    IF WATER IS USED, FOG NOZZ ARE PREF. WATER MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP &(SUPDAT)
Unusual Fire/Explosion Hazard:ISOLATE CONTAINERS FROM HEAT, SPARKS,
    ELECTRICAL EQUIPMENT & OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
    WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCOOP OR SHOVEL MATL INTO APPROPRIATE
    CONTAINER W/NON SPARKING TOOLS. REMOVE SPARK SOURCES, FLAMES & HOT
    SURFACES FROM SURROUNDING AREA. PROVIDE ADEQUATE VENT TO MAINTAIN
    CONTAMINATE CONCENTRATIONS BE LOW THEIR TLV'S.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED. NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:SUFFICIENT VENT SHOULD BE PROVIDED TO KEEP AIR CONTAM CONC
    BELOW APPLIC OSHA PELS/TLV LIM. HEAVY SOLV VAPS (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES OF NEOPRENE, (SUPDAT)
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE BATH IF SPLASHING MAY OCCUR.
Work Hygienic Practices:OBSERVE NORMAL INDUSTRIAL HYGIENIC PRACTICES
    SUCH AS WASHING OF HANDS BEFORE EATING, USING THE RESTROOM OR
    SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:POSS AUTO-IGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT.
    VENT:SHOULD BE REMOVED FROM LOWER LEVELS OF THE AREA. PROT
    GLOVES:RUBBER OR PARACRIL/PVC ARE RECOMMENDED.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>305F,>152C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.39 
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:29

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE FUMES WHEN HEATED TO
    DECOMPOSITION, AS IN WELDING. FUMES MAY CONTAIN CO, CO*2 & NO*X.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS. BEFORE ATTEMPTING CLEAN UP REFER TO HAZARD CAUTION
    INFORMATION IN OTHER SECTIONS OF THIS MSDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.