ETHYL PETROLEUM ADDITIVES INC -- HITEC 536 PERFORMANCE ADDITIVE -- 6850-00F038183
=====================  Product Identification  =====================

Product ID:HITEC 536 PERFORMANCE ADDITIVE
MSDS Date:10/23/1991
FSC:6850
NIIN:00F038183
MSDS Number: BBQLH
=== Responsible Party ===
Company Name:ETHYL PETROLEUM ADDITIVES INC
Address:20 SOUTH FOURTH ST
City:ST LOUIS
State:MO
ZIP:63102-1886
Country:US
Info Phone Num:504-344-7147
Emergency Phone Num:504-344-7147
CAGE:ETHYL
=== Contractor Identification ===
Company Name:ETHYL CORP
Address:330 S 4TH ST
Box:2189
City:RICHMOND
State:VA
ZIP:23219-2189
Country:US
Phone:804-788-5000
CAGE:95643
Company Name:ETHYL PETROLEUM ADDITIVES INC
Address:20 SOUTH FOURTH ST
City:ST LOUIS
State:MO
ZIP:63102-4886
Country:US
Phone:618-274-4000
CAGE:ETHYL

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL MIST

Ingred Name:SUBSTITUTED SUCCINIMIDE

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
    EYES: IRRITATION. SKIN: IRRITATION. INGESTION: HARMFUL IF ASPIRATED
    INTO THE LUNGS. DON'T INDUCE VOMITING.
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IMMEDIATELY FLUSH
    W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH CONTAMINATED AREAS W/SOAP
    & WATER. INGESTION: GIVE TWO GLASSES OF WATER. DON'T INDUCE
    VOMITING. OBTAI N MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>239
Extinguishing Media:DRY CHEMICAL, WATER SPRAY (FOG), FOAM OR CO2
Fire Fighting Procedures:AS FOR PETROLEUM PRODUCTS. USE SCBA

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN ANY SPILLS W/DIKES OR ABSORBENTS TO
    PREVENT MIGRATION/ENTRY INTO SEWERS OR SEAMS. TAKE UP SMALL SPILLS
    W/DRY CHEMICAL ABSORBENT. LARGE SPILLS MAY PICKED-UP W/PUMP OR
    VACUUM/FINISHED OFF W/DRY  CHEMICAL ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:SHORT TERM-(<24 HRS) NOT EXCEED 70C.
    LONG TERM-(>24 HRS) NOT TO EXCEED 50C. MAXIMUM TEMP FOR HEAT
    TRANSFER MEDIA IN AGITATED SYSTEM IS 100C.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR-SUPPLIED RESP WHEN EXPOSED TO VAPORS FROM
    HEATED MATERIAL.
Ventilation:LOCAL EXHAUST. MECHANICAL: RECOMMENDED.
Protective Gloves:RESISTANT
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING SHOULD BE WORN.
Work Hygienic Practices:WASH CLOTHING BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Pres:6
Spec Gravity:0.92
Solubility in Water:NIL
Appearance and Odor:LIGHT BROWN OILY LIQUID W/CHARACTERISTIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, NITROGEN

====================  Disposal Considerations  ====================

Waste Disposal Methods:NOT REGULATED AS A HAZARDOUS WASTE AS OF 3 JULY
    1985. MAY BE DISPOSED OF AS AN INDUSTRIAL WASTE IN A MANNER
    ACCEPTABLE TO GOOD WASTE MANAGEMENT PRACTICE AND IN COMPLIANCE WITH
    APPLICABLE LOCAL, STATE  AND FEDEAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.