adverstisement



CLIFTON ADHESIVE INC -- FA-1030 ACC. -- 8040-00-515-2245
=====================  Product Identification  =====================

Product ID:FA-1030 ACC.
MSDS Date:03/25/1993
FSC:8040
NIIN:00-515-2245
Status Code:A
MSDS Number: CLQZF
=== Responsible Party ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PL
City:WAYNE
State:NJ
ZIP:07470
Country:US
Info Phone Num:201-694-0845; 973-694-0845
Emergency Phone Num:201-694-0845
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:79833
=== Contractor Identification ===
Company Name:CLIFTON ADHESIVE INC
Address:BURGESS PL
Box:City:WAYNE
State:NJ
ZIP:07470
Country:US
Phone:201-694-0845; 973-694-0845
CAGE:79833

=============  Composition/Information on Ingredients  =============

Ingred Name:METHANOL
CAS:67-56-1
RTECS #:PC1400000
= Wt:76.
OSHA PEL:260 MG/M3;200 PPM
ACGIH TLV:262 MG/M3;200 PPM
ACGIH STEL:328 MG/M3;250 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ALIPHATIC AMINE
CAS:63512-71-0
Code:F

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NAUSEA AND/OR NARCOSIS.CHRONIC:
    MAY DAMAGE LIVER. TARGET ORGANS: METHANOL MAY CAUSE LIVER, KIDNEY,
    EYE, LUNG, SPLEEN, BRAIN OR NERVOUS SYSTEM DAMAGE, BASED ON ANIMAL
    DATA.
Effects of Overexposure:IRRITATION TO EYES AND MUCOUS MEMBRANES. CAN
    ALSO CAUSE SKIN DRYNESS AND CRACKING, CAN CAUSE BLINDNESS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS AND LIVER
    AILMENTS.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION. EYES:
    FLUSH EYES ABUNDENTLY WITH CLEAN WATER AND REFER TO PHYSICIAN.
    INGESTION: INDUCE VOMITING. REFER TO PHYSICIAN.  EXCESSIVE
    INHALATION: REMOV E PATIENT TO FRESH AIR OR GIVE OXYGEN. REFER TO
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=12.2C, 54.F
Autoignition Temp:=463.9C, 867.F
Lower Limits:5.5%
Upper Limits:36.5%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPROVED SELF CONTAINED BREATHING
    APPARATUS SHOULD BE WORN. USE WATER SPRAY TO COOL FIRE EXPOSED
    CONTAINERS AND DISPERSE CLOUD IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
    CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
    OIL-DRI, OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
    CONTAINER AND COVER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
    AREA. KEEP TIGHTLY CLOSED. KEEP AWAY FROM HEAT OPEN FLAMES, SPARKS,
    HOT SURFACES AND OXIDIZING AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ATMOSPHERE SUPPLYING OR AIR
    PURIFYING RESPIRATOR FOR ORGANIC VAPORS AS REQUIRED TO MAINTAIN
    EXPOSURE LEVELS BELOW RECOMMENDED LIMITS.
Ventilation:LOCAL EXHAUST: REMOVE VAPORS DURING PROCESSING. MECHANICAL
    EXHAUST: EXPLOSION-PROOF EQUIPMENT. SPECIAL: REDUCE VAPOR
    CONCENTRATIONS BELOW SPECIFIED LIMITS.
Protective Gloves:PVA GLOVES.
Eye Protection:GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TP PREVENT
    SKIN CONTACT.
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
    PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=63.9C, 147.F
Vapor Pres:97.7 @ 20 DEG. C. OR 68F
Vapor Density:1.11
Spec Gravity:0.851
VOC Pounds/Gallon:642
VOC Grams/Liter:5.37
Appearance and Odor:AMBER, PUNGENT AMINE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID STRONG ACIDS, HEAT, OPEN FLAMES,
    SPARKS, HOT SURFACES, AND OXIDIZING AGENTS.
Hazardous Decomposition Products:AMMONIA. HYDROGEN CHLORIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AN
    DLOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.