adverstisement



ACE ENTERPRISES -- C.E.C. CARPET EXTRACTION CLN -- 7930-00N048056
=====================  Product Identification  =====================

Product ID:C.E.C. CARPET EXTRACTION CLN
MSDS Date:06/02/1993
FSC:7930
NIIN:00N048056
MSDS Number: BTYLB
=== Responsible Party ===
Company Name:ACE ENTERPRISES
Address:7527 ADAMS ST
City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Info Phone Num:310-408-1825
Emergency Phone Num:714-634-5988;800-424-9300(CHEMTREC)
CAGE:0SE20
=== Contractor Identification ===
Company Name:ACE ENTERPRISES
Address:7527 ADAMS ST
Box:City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Phone:310-408-1825
CAGE:0SE20

=============  Composition/Information on Ingredients  =============

Ingred Name:NONHAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: CAN CAUSE SLIGHT IRRIT. THERE IS
    ALSO POSSIBILITY OF DEFATTING OF SKIN DUE TO REMOVAL OF SKINS
    NATURAL OILS.EYES: CAN CAUSE SLIGHT IRRIT OF EYES & LIDS. INHAL:
    FUMES FROM PROD ARE GENERALLY CONS IDERED NON-TOX, BUT CAN CAUSE
    SLIGHT IRRIT OF NOSE, NASAL PASSAGES, & LUNGS. INGEST: WHEN CONC
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SOLNS OF PROD ARE SWALLOWED, IT CAN
    CAUSE SLIGHT IRRIT TO MOUTH, ESOPHAGUS, & STOM.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: FLUSH EXPOSED AREA WITH LUKEWARM WATER. EYES: FUSH WITH
    COOL WSTER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN IF IRRITATION
    PERSISTS. INHAL: FUMES FROM PROD ARE GENERALLY CONSIDERED HARMLESS.
    RE MOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTF RESP) . INGEST:
    DO NOT INDUCE VOMIT. HAVE PATIENT DRINK LG AMTS OF MILK/WATER &
    CONSULT PHYS IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:WATER, SAND, CO*2, DRY FOAM, HALON.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . THIS PRODUCT WILL NOT BURN OR SUPPORT
    COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SM SPILL: FLUSH AREA W/WATER TO AN INDUST
    SEWER LINE. LG SPILL: CNTN SPILL W/DIKES OF ABSORB MATLS SUCH AS
    CLAY, SAND/VERMICULITE. THIS MATERIAL IS NOT CONSIDERED HAZARDOUS
    AND MAY BE DISPOSED OF AS N ON-HAZARDOUS REFUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP THIS MATL AWAY FROM HIGH HEAT AND
    OBSERVE PROPER HOUSEKEEPING PROCEDURES. DO NOT MIX CHEMS UNLESS
    INSTRUCTED BY QUALIFIED PERSONNEL.
Other Precautions:CHEMS CAN BE HAZ IF NOT RESPECTED. USE OF PROPER
    EQUIPMENT & PROC FOR HNDLG CHEMS ARE NOT ONLY OF BENEFIT FOR THEIR
    OBVIOUS USES, BUT CAN REDUCE POSSIBILITY OF SERIOUS INJURY AND TIME
    LOSS ACCIDENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE. USE NIOSH/MSHA APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 9.5(1% SOLN); 11.4(CONCENTRATED).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.04(H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:1.05(WATER=1)
Solubility in Water:100% MISCIBLE
Appearance and Odor:CLEAR PINK LIQUID WITH A BLAND ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL HAZ MATLS MUST BE SOLIDIFIED & DISPOSED OF
    IN AN EPA APPRVD CLASS 1 FACILITY. WHEN DISPOSING OF CHEMS, CONT
    LOC, ST, & FED ENVIRONMENTAL AGENCIES TO FULLY UNDERSTAND NECESSARY
    REGULATIONS GOVERNIN G DISPOSAL OF CHEMICAL WASTES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.