SHELL OIL CO -- TURBO T OIL 220, 65609 -- 9150-00N036500
=====================  Product Identification  =====================

Product ID:TURBO T OIL 220, 65609
MSDS Date:04/05/1991
FSC:9150
NIIN:00N036500
MSDS Number: BQRBD
=== Responsible Party ===
Company Name:SHELL OIL CO
Box:4320
City:HOUSTON
State:TX
ZIP:77210
Country:US
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461;800-424-9300(CHEMTREC)
Preparer's Name:G. A. VAN GELDER
CAGE:SHELO
=== Contractor Identification ===
Company Name:SHELL OIL CO
Box:4320
City:HOUSTON
State:TX
ZIP:77210-5000
Country:US
Phone:713-473-9461/713-241-2252
CAGE:SHELO
Company Name:SHELL OIL COMPANY
Address:Box:2463
City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:800-231-6950
CAGE:54527

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES CATALYTIC DEWAXED HEAVY
    PARAFFINIC (SEV SOLV-REFINING AND/OR HYDROTREATMENT) (ING 5)
CAS:64742-70-7
RTECS #:PY8045500
Fraction by Wt: 45-50%

Ingred Name:ING 4: (SOLVENT REFINED CATALYTIC DEWAXED HEAVY PARAFFINIC
    OIL)
RTECS #:9999999ZZ

Ingred Name:MINOR ADDITIVES
Fraction by Wt: <1%

Ingred Name:SUPP DATA: SIMILAR PROD TESTING, PROD IS PRESUMED TO BE NO
    MORE THAN SLIGHTLY TOXIC IF INGESTED. INHAL:INHAL OF (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7:VAP (GENERATED AT HI TEMP ONLY) OR OIL MIST MAY CAUSE
    MILD IRRIT OF UPPER RESP TRACT. FIRST AID:NOT INDUCE (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8: VOMIT.IN GENERAL, NO TREATMENT NEC UNLESS LG QTY OF
    PROD INGESTED. HOWEVER,GET MED ADVICE. NOTE TO PHYS: (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: IN GENERAL, EMESIS INDUCTION IS UNNECESSARY IN HI
    VISCOSITY, LOW VOLATILITY PRODS, I.E., MOST OILS AND GREASES.
RTECS #:9999999ZZ

Ingred Name:SPILL PROC:TO STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE
    W/ABSORB SUCH AS CLAY, SAND/OTHER SUITABLE MATL; DISP OF (ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11: PROPERLY. FLUSH AREA W/WATER TO REMOVE TRACE
    RESIDUE. SML SPILLS: TAKE UP W/AN ABSORB MATL AND DISP OF PROPERLY.
RTECS #:9999999ZZ

Ingred Name:SHELL TURBO T OIL 220 CONTAINING INGREDIENTS 2-5
RTECS #:9999999ZZ
Fraction by Wt: 100%

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
    HEAVY PARAFFINIC;(SOLVENT REFINED HEAVY PARAFFINIC DISTILLATE)
CAS:64742-54-7
RTECS #:PY8035501
Fraction by Wt: 55-65%

Ingred Name:SOLVENT REFINED HYDROTREATED RESIDUAL OIL
CAS:64742-57-0
Fraction by Wt: 35-55%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL,RAT): >5.0 G/KG.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: BASED ON ESSENTIALLY SIMILAR PROD
    TESTING. PROD IS PRESUMED TO BE NON-IRRIT TO EYES. SKIN:BASED ON
    ESSENTIALLY SIMILAR PROD TESTING,PROD IS PRESUMED TO BE NON-IRRIT
    TO SKIN. PRLNGD & RPTD CONT MA Y RSLT IN SKIN DISORDERS SUCH AS
    DERM,OIL ACNE/FOLLICULITIS. ACCIDENTAL RELS UNDER HIGH PRESS APPLIC
    MAY RSLT (SUPDAT)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION AS NOTED ABOVE. NECROSIS MAY BE
    EVIDENCED BY DELAYED ONSET OF PAIN AND TISSUE DAMAGE A FEW HOURS
    FOLLOWING HIGH PRESSURE INJECTION.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND RESPIRATORY
    DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/WATER. IF IRRIT OCCURS,GET MED ATTN.SKIN: REMOVE
    CONTAMD CLTHG & WIPE EXCESS OFF. WASH W/SOAP & WATER/WATERLESS HAND
    CLEANER FOLLOWED BY SOAP & WATER.IF IRRIT OCCURS,GET MED ATTN.IF
    MATL  IS INJECTED UNDER SKIN.GET MED ATTN PROMPTLY TO PVNT SERIOUS
    DMG;DO NOT WAIT FOR SYMP TO DEVELOP. INHAL:REMOVE VICTIM TO FRESH
    AIR & PROVIDE OXYGEN IF BRTHG IS DFCLT.GET MED ATTN. INGEST: DO
    (ING 8)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:455F,235C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    .COOL FIRE EXPOS CNTNRS W/WATER.DO NOT USE DIRECT STREAM OF
    WATER.PROD WILL FLOAT & CAN BE REIGNITED(SUPDAT)
Unusual Fire/Explosion Hazard:MATERIALS WILL NOT BURN UNLESS PREHEATED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
    CAUTIOUS JUDGMENT WHEN CLEANING UP LRG SPILLS. LRG SPILLS:WEAR
    NIOSH/MSHA APPRVD RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCE OF
    LEAK IF SAFE TO DO SO.DIKE	& CONTAIN. REMOVE W/VACUUM
    TRUCKS/PUMP(ING 11)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
    ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
    TEMPERATURES.
Other Precautions:MINIMIZE PROLONGED SKIN CONTACT. PROPERLY DISPOSE OF
    CONTAMINATED LEATHER ARTICLES, INCLUDING SHOES, THAT CANNOT BE
    DECONTAMINATED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOS MAY OR DOES EXCEED OCCUP EXPOS LIMITS
    USE A NIOSH/MSHA APPRVD RESPIRATOR TO PREVENT OVEREXPOSURE. IN
    ACCORD WITH 29 CFR 1910.134 USE EITHER A NIOSH/MSHA APPRVD
    ATMOSPHERE-SUPP RESP/AN AIR-PUR IFYING RESP FOR ORG VAPS &
    PARTICULATES.
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
    CONCENTRATIONS BELOW CURRENT EXPOSURE LIMITS .
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO MINIMIZE
    PROLONGED SKIN CONTACT.
Work Hygienic Practices:MIN PRLNGD SKIN CONT. WASH W/SOAP & WATER
    BEFORE EATING, DRINKING, SMOKING/USING TOILET FACILITIES. LAUNDER
    (SUPP DATA)
Supplemental Safety and Health
FIRE FIGHT PROC: ON SURF OF WATER.HAZ DECOMP PRODS: GASES WILL EVOLVE
    WHEN MATL UNDERGOES PYROLYSIS/COMBUST. CARBON MONOXIDE & OTHER
    UNIDENTIFIED ORG CMPDS MAY BE FORMED UPON COMBUST.HYGIENE PRACT: CO
    NTAMD CLTHG BEFORE REUSE.HLTH HAZ:IN INJECT OF OIL INTO SKIN
    CAUSING LOC NECROSIS.INGEST: BASED ON ESSENTIALLY (ING 7)

==================  Physical/Chemical Properties  ==================

HCC:V6
Melt/Freeze Pt:M.P/F.P Text:5F,-15C
Spec Gravity:0.8871 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW OIL. SLIGHT HYDROCARBON ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, OPEN FLAME.
Hazardous Decomposition Products:THERM DECOMP PRODS ARE HIGHLY
    DEPENDENT ON COMBUST CNDTNS. COMPLEX MIX OF AIRBORNE SOLID, LIQ,
    PARTICULATES & (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.