adverstisement



M. W. DUNTON COMPANY -- NOKORODE SOLDERING PASTE -- 3439-00-347-5328
=====================  Product Identification  =====================

Product ID:NOKORODE SOLDERING PASTE
MSDS Date:10/26/1989
FSC:3439
NIIN:00-347-5328
MSDS Number: BJVZN
=== Responsible Party ===
Company Name:M. W. DUNTON COMPANY
Address:3 BRIDAL AVENUE
Box:232
City:WEST WARWICK
State:RI
ZIP:02893
Info Phone Num:(401) 821-1832
Emergency Phone Num:(401) 821-1832
CAGE:LO275
=== Contractor Identification ===
Company Name:DUNTON N W CO
Address:3 BRIDAL AVE
Box:City:WEST WARWICK
State:RI
ZIP:02893-2901
Country:US
Phone:401-821-1832
CAGE:81397
Company Name:M. W. DUNTON COMPANY
Address:3 BRIDAL AVENUE
Box:232
City:WEST WARWICK
State:RI
ZIP:02893
Phone:(401) 821-1832
CAGE:LO275

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC CHLORIDE  (SARA III)
CAS:7646-85-7
RTECS #:ZH1400000
Fraction by Wt: <25%
OSHA PEL:1 MG/M3/2 STEL
ACGIH TLV:1 MG/M3/2STEL FUME93
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:AMMONIUM CHLORIDE  (SARA III)
CAS:12125-02-9
RTECS #:BP4550000
Fraction by Wt: <25%
OSHA PEL:10 MG/M3/20 STEL
ACGIH TLV:10 MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PETROLATUM, GREASE
CAS:8009-03-8
Fraction by Wt: <80%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (RAT) ORAL: 350 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, DISCOMFORT, RASH, &
    CYANOSIS. EYE: IRRITATION, DISCOMFORT, TEARING, & BLURRING OF
    VISION. INHALATION: FUMES/DUST/MIST MAY CAUSE INJURY/IRRITATION TO
    THE UPPER RESPIRATORY TRACT, & DA MAGE TO THE MUCOUS MEMBRANES OF
    THE NASOPHARYNX. INGESTION: TOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: BURNS & ULCERATION. INHALATION: LUNG
    IRRITATION, COUGH, DISCOMFORT, DIFFICULTY BREATHING, SHORTNESS OF
    BREATH, PNEUMONITIS, & FATAL. INGESTION: FATAL.
Medical Cond Aggravated by Exposure:LUNG/RESPIRATORY DISEASES,
    DERMATITIS, & CONJUNCTIVITIS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
    WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
    INGESTION: GIVE PLENTY OF WATER OR MILK. DON'T INDUCE VOMITING.
    OBTAIN MEDICA L ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:399.2F
Extinguishing Media:FOAM, SAND, & CO2.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NON-FLAMMABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NEUTRALIZE W/SODIUM CARBONATE OR TRI-SODIUM
    PHOSPHATE.
Neutralizing Agent:SODIUM CARBONATE OR TRI-SODIUM PHOSPHATE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:FLUX IS A STABLE MATERIAL IN CLOSED
    CONTAINERS AT ROOM TEMPERATURE UNDER NORMAL STORAGE & HANDLING
    CONDITIONS. KEEP HEAD OUT OF SOLDERING FUMES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE FUME OR AIR SUPPLIED RESPIRATOR WHEN
    SOLDERING IN CONFINED NON-VENTILATED AREA.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION DURING SOLDERING AT THE
    FLAME SO AS TO CAPTURE ALL GASES & FUMES.
Protective Gloves:RUBBER
Eye Protection:GOGGLES, FACE SHIELD
Other Protective Equipment:HEAD & BODY PROTECTION
Supplemental Safety and Health
LARGE AMOUNTS OF AMMONIUM CHLORIDE FUMES ARE FREQUENTLY EVOLVED IN
    GALVANIZING OPERATIONS.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:120-150F
Spec Gravity:1.06
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN GOLD TO BLACK PASTE W/NO APPRECIABLE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NYLON & CELCON PLASTICS
Stability Condition to Avoid:SPARKS & FLAME
Hazardous Decomposition Products:ZINC CHLORIDE, ZINC OXIDE FUMES, &
    HYDROGEN CYANIDE GAS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FLUSH TO CHEMICAL WASTE DISPOSAL IN ACCORDANCE
    W/LOCAL, STATE, & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.