ATCO MANUFACTURING CO -- CON-TEC II (A/1GL) -- 6850-00N045755
=====================  Product Identification  =====================

Product ID:CON-TEC II (A/1GL)
MSDS Date:09/30/1992
FSC:6850
NIIN:00N045755
MSDS Number: BTPYL
=== Responsible Party ===
Company Name:ATCO MANUFACTURING CO
Address:1400 BARCLAY CIRCLE
City:MARIETTA
State:GA
ZIP:30060
Country:US
Info Phone Num:404-424-7550
Emergency Phone Num:404-424-7550
CAGE:3Y648
=== Contractor Identification ===
Company Name:ATCO MANUFACTURING CO
Address:1400 BARCLAY CIRCLE
Box:City:MARIETTA
State:GA
ZIP:30060
Country:US
Phone:404-424-7550
CAGE:3Y648

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYL ALCOHOL
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 45-50%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:METHANE, CHLORODIFLUORO-;(CHLORODIFLUOROMETHANE)
CAS:75-45-6
RTECS #:PA6390000
Fraction by Wt: 35-40%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM
Ozone Depleting Chemical:2

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:MAY CAUSE DIZZINESS, DROWSINESS
    ABOVE 1000 PPM, BELOW 1000 PPM MINIMAL EFFECTS. SKIN: MAY CAUSE
    FROSTBITE. INGEST: STOMACH CRAMPS, DROWSINESS, PAIN, VOMITING,
    NAUSEA. EYES: IRRITATION, POSSIBLE	CORNEA INJURY.
    CHLOROFLUOROCARBON MATERIALS HAVE CAUSED SENSITIZATION OF THE
    MYOCARDIUM TO EPINEPHRINE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IN LABORATORY ANIMALS AND COULD HAVE
    A SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS (E.GL, EPINEPHRINE) MAY
    BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES IN HUMANS
    ACYTELY OR CHRONICALLY EX POSED TO CHLOROCARBONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/ WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH
    SOAP & WATER. INHAL: REMOVE TO FRESH AIR. INGEST: NOT CONSIDERED A
    POSSIBLE ROUTE. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:80.0F,26.7C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:KEEP CNTNR COOL. USE EQUIP/SHIELDING REQD TO
    PROT PERS AGAINST BURSTING,RUPTURING/VENT CNTNR. WEAR NIOSH/MSHA
    APPRVD PRESS DEMAND SCBA & FULL PROT EQUIP
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F)
    CONTAINERS MAY VENT, RUPTURE OR BURST. THERMAL DECOMP PRODS MAY
    INCLUDE CHLORIDES, FLUORIDES AND PHOSGENE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIALS & PLACE IN CLOSED CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
    120F.
Other Precautions:FOLLOW DIRECTIONS ON THE PRODUCT LABEL. KEEP OUT OF
    REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
    ACCEPTABLE IF CONCENTRATION IS ABOVE 1000 PPM.
Ventilation:LOCAL EXHAUST: DO NOT USE IN CONFINED SPACES.
Protective Gloves:VITON,PVC,PVA GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:STANDARD INDUSTRIAL PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:186F,86C
Vapor Pres:75
Spec Gravity:0.807
Solubility in Water:APPROX 20%
Appearance and Odor:TRANSPARENT LIQUID, CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI METALS, ALKALINE EARTH METALS, POWDERED ALUMINUM, BERYLIUM,
    ZINC.
Stability Condition to Avoid:DO NOT EXPOSE TO FLAMES OR TEMPERATURES
    >120F.
Hazardous Decomposition Products:HYDROCHLORIC AND HYDROFLUORIC ACIDS
    AND POSSIBLE CARBONYL HALIDES. PHOSGENE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PRODUCTS DO NOT
    GENERATE HAZARDOUS WASTE. EMPTY DE-PRESSURIZED CONTAINERS SHOULD BE
    RECYCLED. CONSULT LOCAL, STATE & FEDERAL AUTHORITIES FOR APPROVED
    DISPOSAL PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.