CHEVRON PRODUCTS CO -- AMERICAN INDUSTRIAL OIL ISO 220 -- -
=====================  Product Identification  =====================

Product ID:AMERICAN INDUSTRIAL OIL ISO 220
MSDS Date:01/08/1999
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CKDTR
=== Responsible Party ===
Company Name:CHEVRON PRODUCTS CO
Address:555 MARKET ST, ROOM 803
City:SAN FRANCISCO
State:CA
ZIP:94105-2870
Country:US
Info Phone Num:800-582-3835; 415-894-0703
Emergency Phone Num:800-231-0623; 703-527-3887
Resp. Party Other MSDS Num.:006964
Chemtrec Ind/Phone:(800)424-9300
CAGE:2H740
=== Contractor Identification ===
Company Name:CHEVRON PRODUCTS CO GLOBAL LUBRICANTS
Address:555 MARKET STREET ROOM 803
Box:City:SAN FRANCISCO
State:CA
ZIP:94105-2870
Country:US
Phone:800-228-3500/415-894-0703
CAGE:2H740

=============  Composition/Information on Ingredients  =============

Ingred Name:SEVERELY REFINED PETROLEUM DISTILLATE; (LUBRICATING BASE
    OIL) (CONSISTING OF A MIXTURE OF INGREDIENTS)
> Wt:98.
OSHA PEL:5 MG/M3 MIST
ACGIH TLV:5 MG/M3 MIST
ACGIH STEL:10 MG/M3 MIST

Ingred Name:DISTILLATES (PETROLEUM), SOLVENT-REFINED HEAVY PARAFFINIC
    (MAY BE CONTAINED IN MIXTURE OF BASE OIL)
CAS:64741-88-4
RTECS #:PY8040501

Ingred Name:DISTILLATES (PETROLEUM), SOLVENT-REFINED LIGHT PARAFFINIC
    (MAY BE CONTAINED IN A MIXTURE OF BASE OIL)
CAS:64741-89-5
RTECS #:PY8041501

Ingred Name:DISTILLATES (PETROLEUM), SOLVENT-REFINED HEAVY NAPHTHENIC
    (MAY BE CONTAINED IN A MIXTURE OF BASE OIL)
CAS:64741-96-4
RTECS #:PY8040001

Ingred Name:DISTILLATES (PETROLEUM), SOLVENT-REFINED LIGHT NAPHTHENIC
    (MAY BE CONTAINED IN A MIXTURE OF BASE OIL)
CAS:64741-97-5
RTECS #:PY8041001

Ingred Name:RESIDUAL OILS (PETROLEUM), SOLVENT-REFINED (MAY BE
    CONTAINED IN A MIXTURE OF BASE OIL)
CAS:64742-01-4

Ingred Name:DISTILLATES (PETROLEUM), HYDROTREATED HEAVY NAPHTHENIC (MAY
    BE CONTAINED IN A MIXTURE OF BASE OIL)
CAS:64742-52-5
RTECS #:PY8035001

Ingred Name:DISTILLATES (PETROLEUM), HYDROTREATED LIGHT NAPHTHENIC (MAY
    BE CONTAINED IN MIXTURE OF BASE OIL)
CAS:64742-53-6
RTECS #:PY8036001

Ingred Name:DISTILLATES (PETROLEUM), HYDROTREATED HEAVY PARAFFINIC (MAY
    BE CONTAINED IN MIXTURE OF BASE OIL)
CAS:64742-54-7
RTECS #:PY8035501

Ingred Name:RESIDUAL OILS (PETROLEUM), SOLVENT-DEWAXED (MAY BE
    CONTAINED IN MIXTURE OF BASE OIL)
CAS:64742-62-7

Ingred Name:DISTILLATES (PETROLEUM), SOLVENT-DEWAXED HEAVY PARAFFINIC
    (MAY BE CONTAINED IN MIXTURE OF BASE OIL)
CAS:64742-65-0
RTECS #:PY8038501

Ingred Name:LUBRICATING OILS (PETROLEUM), C>25, HYDROTREATED BRIGHT
    STOCK-BASED (MAY BE CONTAINED IN MIXTURE OF BASE OIL)
CAS:72623-83-7

Ingred Name:ADDITIVES
< Wt:2.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: NOT EXPECTED TO CAUSE PROLONGED
    OR SIGNIFICANT IRRITATION. SKIN: CONTACT IS NOT EXPECTED TO CAUSE
    PROLONGED OR SIGNIFICANT IRRITATION. NOT EXPECTED TO BE HARMFUL TO
    INTERNAL ORGANS IF ABSORBED TH ROUGH SKIN. HIGH-PRESSURE EQUIPMENT
    INFORMATION: ACCIDENTAL HIGH-VELOCITY INJECTION UNDER SKIN OF
    MATERIALS OF THIS TYPE MAY RESULT IN SERIOUS INJURY. SEEK MEDICAL
    ATTENTION AT ONCE SHOULD AN ACCIDENT  OCCUR. THE INITIAL WOUND AT
    INJECTION SITE MAY NOT APPEAR TO BE SERIOUS AT FIRST; BUT, IF LEFT
    UNTREATED, COULD RESULT IN DISFIGUREMENT OR AMPUTATION OF AFFECTED
    PART. INGESTION: NOT EXPECTED TO BE H ARMFUL IF SWALLOWED. (EFTS OF
    OVEREXP)
Explanation of Carcinogenicity:NONE OF THE OILS REQUIRES A CANCER
    WARNING UNDER OSHA HAZARD COMMUNICATION STANDARD (29 CFR
    1910.1200). THESE OILS HAVE NOT BEEN LISTED IN THE NTP ANNUAL
    REPORT NOR HAVE THEY BEEN CLASSIFIED BY IARC A S; CARCINOGENIC TO
    HUMANS (GROUP 1), PROBABLY CARCINOGENIC TO HUMANS (GROUP 2), OR
    POSSIBLY CARCINOGENIC TO HUMANS (GROUP 2B).
Effects of Overexposure:HEALTH HAZARDS: INHALATION: CONTAINS A
    PETROLEUM-BASED MINERAL OIL. MAY CAUSE RESPIRATORY IRRITATION OR
    OTHER PULMONARY EFFECTS FOLLOWING PROLONGED OR REPEATED INHALATION
    OF OIL MIST AT AIRBORNE LEVEL S ABOVE THE RECOMMENDED MINERAL OIL
    MIST EXPOSURE LIMIT.

=======================  First Aid Measures  =======================

First Aid:EYES:REMOVE CONTACT LENSES, IF WORN, & FLUSH W/WATER FOR AT
    LST 15 MINS. SKIN:REMOVE CLTHG & SHOES IF CONTAM. USE WATERLESS
    HAND CLEANER, MINERAL OIL/PETRO JELLY TO REMOVE MATL. THEN WASH
    SKIN W/SOAP  & WATER. WASH/CLEAN CONTAM CLTHG & SHOES BEFORE REUSE.
    INGEST:DO NOT INDUCE VOMIT. GIVE PERS GLASS OF WATER TO DRINK & GET
    MED ADVICE. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERS. INHAL:MOVE
    EXPOS PERS	TO FRESH AIR. GET MED ATTN IF COUGH/RESP DISCOMFORT
    OCCURS. NOTE TO MD:IN ACCIDENT INVOLVING HIGH-PRESS EQUIP, THIS
    PROD MAY BE INJECTED UNDER SKIN. SUCH AN ACCIDENT MAY RSLT IN SM,
    SOMETIMES BLOODLE SS, PUNCTURE WOUND. HOWEVER, (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>176.1C, 349.F
349-500F176-260C
Autoignition Temp:Autoignition Temp Text:N/AV
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . THIS MATERIAL WILL BURN ALTHOUGH IT IS NOT EASILY
    IGNITED.
Unusual Fire/Explosion Hazard:CLASSIFICATION (29 CFR 1910.1200:NOT
    CLASSIFIED BY OSHA AS FLAMM/COMBUST. LEAKS/RUPTURES IN HIGH PRESS
    SYS USING MATLS OF THIS TYPE CAN CREATE FIRE HAZ WHEN IN VICIN OF
    IGNIT SOURCES (E.G., OPEN FLAME , PILOT LIGHTS, SPARKS/ELECTRIC
    ARCS). NFPA/HMIS RATINGS: HEALTH - 0 (NFPA), 1 (HMIS); FLAMMABILITY
    - 1; REACTIVITY 0.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP SOURCE OF LEAK OR RELEASE. CLEAN UP
    RELEASES AS SOON AS POSSIBLE, OBSERVING PRECS IN EXPOS
    CONTROLS/PERSONAL PROT. CONTAIN LIQUID TO PREVENT FURTHER CONTAM OF
    SOIL, SURFACE WATER OR GROUNDWATER.  CLEAN UP SPILLS USING
    APPROPRIATE TECHNIQUES SUCH AS SORBENT MATERIALS OR PUMPING. WHERE
    FEASIBLE & APPROP, REMOVE CONTAM SOIL. FOLLOW PRESCRIBED PROCS FOR
    REPORTING & RESPONDING TO LARGER RELEASES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT USE IN HIGH PRESS SYS IN VICIN
    OF FLAMES, SPKS & HOT SURFS. USE ONLY IN WELL VENTED AREAS. KEEP
    CNTNR CLSD. DRUM IS NOT DESIGNED TO CONTAIN PRESS. DO NOT USE PRESS
    TO EMPTY DRUM/DRUM MAY RUPTUR E W/EXPLO FORCE. EMPTY CNTNRS RETAIN
    PROD RESIDUE (SOLID, LIQ &/OR VAP) & CAN BE DANGEROUS.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
    GRIND/EXPOSE SUCH CNTNRS TO HEAT, FLAME, SPKS, STATIC ELEC/OTHER
    SOURCES OF IGNIT. THEY MAY EXPLODE & CAUSE INJURY/DEATH. EMPTY
    DRUMS SHOULD BE COMP LETELY DRAINED, PROPERLY BUNGED & PROMPTLY
    RETURNED TO DRUM RECONDITIONER/PROPERLY DISPOSED OF. AVOI D CONTAM
    (SUPP DATA)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO RESPIRATORY PROT IS NORMALLY REQUIRED. IF
    USER OPERATIONS GENERATE AN OIL MIST, DETERMINE IF AIRBORNE CONCS
    ARE BELOW RECOMMENDED MINERAL OIL MIST EXPOS LIMITS. IF NOT WEAR A
    NIOSH APPROVED RESPIRA TOR THAT PROVIDES ADEQ PROT FROM MEASURED
    CONCENTRATIONS OF THIS MATERIAL. USE THE FOLLOWING ELEMENTS FOR
    NIOSH APPROVED AIR-PURIFYING RESPIRATORS: PARTICULATE.
Ventilation:USE IN WELL-VENTED AREA. IF USER OPERATIONS GENERATE OIL
    MIST, USE PROCESS ENCLOSURES, LOC EXHST VENT/OTHER ENGINEERING
    CONTROLS TO CONTROL AIRBORNE (SUPP DATA)
Protective Gloves:NITRILE, SILVERSHIELD OR VITON GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . NO
    SPECIAL PROT CLTHG IS NORMLY REQD. WHERE SPLASHING IS POSS, SELECT
    PROT CLTHG DEPENDING ON OPERATIONS CONDUCTED, PHYSICAL REQUIREMENTS
    & OTHER SUBSTANCES.
Supplemental Safety and Health
FIRST AID PROC:BECAUSE OF ITS DRIVING FORCE, MATL INJECTED INTO
    FINGERTIP CAN BE DEPOSITED INTO PALM DISCOLORATION & INTENSE
    THROBBING PAIN. IMMED TREATMENT AT SURGICAL EMER CENTER IS REC. --
    VENT:LEV ELS BELOW REC MINERAL OIL MIST EXPOS LIMS. -- OTHER
    PREC:SOIL/RELEASING THIS MATL INTO SEWAGE & (ECOLOGICAL INFO)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NO DATA AVAILABLE
Melt/Freeze Pt:M.P/F.P Text:NOT APPLIC/NO DATA AVAIL
Spec Gravity:0.86-0.87 @ 15.6C
VOC Pounds/Gallon:15
pH:NO DATA AVAIL
Viscosity:22-210 CST @ 40C (MIN)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID.
Percent Volatiles by Volume:NOT APPLIC

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
    PEROXIDES, ETC.
Stability Condition to Avoid:DO DATA AVAILABLE.
Hazardous Decomposition Products:NO DATA AVAILABLE. COMBUSTION
    PRODUCTS: NORMAL COMBUSTION FORMS CARBON DIOXIDE AND WATER VAPOR;
    INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.
Conditions to Avoid Polymerization:POLYMERIZATION WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:EYE/SKIN IRRITATION HAZARD AND ACUTE
    ORAL/RESPIRATORY TOXICITY IS BASED ON DATA FOR A SIMILAR MATERIAL.
    THIS PRODUCT CONTAINS PETROLEUM BASE OILS WHICH MAY BE REFINED BY
    VARIOUS PROCESSES INCLUDING SE VERE SOLVENT EXTRACTION, SEVERE
    HYDROCRACKING, OR SEVERE HYDROTREATING.

=====================  Ecological Information  =====================

Ecological:ECOTOXICITY: THIS MATERIAL IS NOT EXPECTED TO BE HARMFUL TO
    AQUATIC ORGANISMS. ENVIRONMENTAL FATE: THIE MATERIAL IS NOT
    EXPECTED TO BE READILY BIODEGRADABLE. -- SUPP DATA: DRAINAGE
    SYSTEMS AND BODIES	OF WATER. GENERAL CONSIDERATIONS: CONSIDER THE
    POTENTIAL HAZARDS OF THIS MATERIAL (SEE HAZARDS IDENTIFICATION
    SECTION), APPLICABLE EXPOSURE LIMITS, JOB ACTIVITIES, AND OTHER
    SUBSTANCES IN THE WORK PLA CE WHEN DESIGNING ENGINEERING CONTROLS
    AND SELECTING PERSONAL PROTECTIVE EQUIPMENT. IF ENGINEERING
    CONTROLS OR WORK PRACTICES ARE NOT ADEQUATE TO PREVENT EXPOSURE TO
    HARMFUL LEVELS OF THIS MATERIAL, T HE PERSONAL PROTECTIVE (OTHER
    INFO)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . OIL COLLECTION SERVICES ARE AVAILABLE FOR USED OIL
    RECYCLING OR DISPOSAL. PLACE CONTAMINATED MATLS IN CNTNRS & DISPOSE
    OF IN A MANNER  CONSISTENT W/APPLIC REGS. CONTACT YOUR SALES
    REPRESENTATIVE OR LOCAL ENVIRONMENTAL OR HEALTH AUTHORI TIES FOR
    APPROVED DISPOSAL OR RECYCLING METHODS.

===================  MSDS Transport Information  ===================

Transport Information:THE DESCRIPTION SHOWN MAY NOT APPLY TO ALL
    SHIPPING SITUATIONS. CONSULT 49 CFR, OR APPROPRIATE DANGEROUS GOODS
    REGULATIONS, FOR ADDITIONAL DESCRIPTION REQUIREMENTS (E.G.,
    TECHNICAL NAME) AND MODE-SPEC IFIC OR QUANTITY-SPECIFIC SHIPPING
    REQUIREMENTS. DOT SHIPPING NAME: NONE. DOT HAZARD CLASS: NONE. DOT
    IDENTIFICATION NUMBER: NONE. DOT PACKING GROUP: NOT APPLICABLE.
    ADDITIONAL INFO: PETROLEUM LUBRICA TING OIL - NOT HAZARDOUS BY U.S.
    DOT. ADR/RID HAZARD CLASS - NOT APPLICABLE.

=====================  Regulatory Information  =====================

SARA Title III Information:SARA 311 CATEGORIES: 1. IMMEDIATE (ACUTE)
    HEALTH EFFECTS: NO. 2. DELAYED (CHRONIC) HEALTH EFFECTS: NO. 3.
    FIRE HAZARD: NO. 4. SUDDEN RELEASE OF PRESSURE HAZARD: NO. 5.
    REACTIVITY HAZARD: NO. REGULATOR Y LISTS SEARCHED: SARA 313; SARA
    302/304; CERCLA 302.4.
Federal Regulatory Information:ALL COMPONENTS OF THIS MATL ARE ON TOX
    SUBSTANCES CONTROL ACT CHEM SUBSTANCE INVENTORY. PREPARED ACCORDING
    TO OSHA HAZ COMMUNICATION STD (29 CFR 1910.1200) & ANSI MSDS STD
    (Z400.1) BY TOXICOLOGY & HLT H RISK ASSESSMENT UNIT, CRTC, P.O. BOX
    1627, RICHMOND, CA 94804. EU RISK & SFTY LBL PHRASES:MAY CAUSE
    LONG-TERM ADVERSE EFTS IN AQUATIC ENVIRON. WHMIS
    CLASSIFICATION:THIS PROD IS NOT CONSIDERED CONTRO LLED PROD
    ACCORDING TO CRITERIA OF CANADIAN CONTROLLED PRODS REGS. REGULATORY
    LISTS SEARCHED: NTP CA RCIN; IARC GRP 1; IARC GRP 2A; IARC GRP 2B;
    ACGIH TWA; ACGIH STEL; ACGIH CALC TLV; OSHA PEL; DOT MARINE
    POLLUTANT; (STATE REGULATORY DATA)
State Regulatory Information:NEW JERSEY RTD CLASSIFICATION: UNDER NJ
    RIGHT-TO-KNOW ACT L. 1983 CHAPTER 315 N.J.S.A. 34:51-1 ET. SEQ.,
    PROD IS TO BE IDENTIFIED AS FOLLOWS: PETROLEUM OIL. REGULATORY
    LISTS SEARCHED: MASS RTK; CA PRO P 65-CARCIN; CA PROP 65-REPRO TOX;
    PA RTK; NJ RTK; MN RTK. -- FED REGULATORY: CHEVRON TWA; EPA CARCIN;
    TSCA SECT 5 (A)(2); TSCA SECT 6; TSCA SECT 12(B); TSCA SECT 8(A);
    TSCA SECT 8(D); TSCA SECT 4(A);  CANADIAN WHMIS; OSHA CEILING;
    CHEVRON STEL - SEVERELY REFINED PETROLEUM DISTILLATE IS FOUND ON
    FOLL OWING REGULATORY LISTS: ACGIH TWA; ACGIH STEL; OSHA PEL.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.