adverstisement



MARMON/KEYSTONE CORP -- CARBON,ALLOY STEEL AISI/SAE GRADE 10XX-93XX -- 9510-00N009096
=====================  Product Identification  =====================

Product ID:CARBON,ALLOY STEEL AISI/SAE GRADE 10XX-93XX
MSDS Date:01/01/1991
FSC:9510
NIIN:00N009096
MSDS Number: BCRPN
=== Responsible Party ===
Company Name:MARMON/KEYSTONE CORP
Box:992
City:BUTLER
State:PA
ZIP:16001
Country:US
Info Phone Num:412-283-4500
Emergency Phone Num:412-283-3000
CAGE:3A044
=== Contractor Identification ===
Company Name:MARMON/KEYSTONE CORP
Box:City:BUTLER
State:PA
ZIP:16001
Country:US
Phone:412-283-4500
CAGE:3A044

=============  Composition/Information on Ingredients  =============

Ingred Name:MOLYBDENUM. %:<0.15-1.1
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: SEE ING
Other REC Limits:N/E 
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Ingred Name:NICKEL. %:<0.01-10
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Ingred Name:PHOSPHOROUS (YELLOW). %:<0.04-0.12
CAS:7723-14-0
RTECS #:TH3500000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:0.1 MG/M3
ACGIH TLV:0.1 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: <0.15-2%
Other REC Limits:N/K 
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:SULFUR. %:<0.05-0.35
CAS:7704-34-9
RTECS #:WS4250000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:13 MG/CUM DIOXIDE
ACGIH TLV:5 MG/CUM DIOXIDE

Ingred Name:VANADIUM. %:<0.01-0.15
CAS:7440-62-2
RTECS #:YW1355000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:C,0.5 MG V2O5/M3 RD
ACGIH TLV:0.05 MG V205/M3;9293

Ingred Name:ZINC; (ZINC COATING). %:2 OZ/SQ FT.
CAS:1314-13-2
RTECS #:ZG8600000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293

Ingred Name:ALUMINUM; (ALUMINUM COATING). %:0.5 OZ/SQ FT.
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

Ingred Name:SUPDAT:EXPOSURE RECOMMENDATIONS .
RTECS #:9999999ZZ

Ingred Name:PROT GLOVES:BURNING OR HANDLING.
RTECS #:9999999ZZ

Ingred Name:EYE PROT:GRINDING, FACESHIELD W/APPROPRIATE SHADING FOR
    WELDING & CUTTING.
RTECS #:9999999ZZ

Ingred Name:IRON (FE),86.5-99.5%
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:10 MG/CUM OXIDE FUME
ACGIH TLV:5 MG/CUM OXIDE FUME

Ingred Name:ALUMINUM. (FOR PYRO POWDERS, OSHA PEL & ACGIH TLV IS 5
    MG/M3). %:<0.1-0.5
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

Ingred Name:BISMUTH (BI),<0.2-0.5%
CAS:7440-69-9
RTECS #:EB2600000
Fraction by Wt: SEE ING
Other REC Limits:N/K 

Ingred Name:BORON (B), <0.01-1.0%
CAS:7440-42-8
RTECS #:ED7350000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:15 MG/CUM OXIDE FUME
ACGIH TLV:10 MG/CUM OXIDE FUME

Ingred Name:CARBON. %:<0.1-1.5. TLV:5 MG/M3 AS CARBON BLACK (MFR).
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: SEE ING
Other REC Limits:SEE INGREDIENT NAME
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:CHROMIUM
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: <0.4-10%
Other REC Limits:N/K 
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:NIOBIUM; (COLUMBIUM). %:<0.15-0.35
CAS:7440-03-1
Fraction by Wt: SEE ING
Other REC Limits:N/K 

Ingred Name:COPPER. %:<0.3-1.9
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:LEAD. %:<0.01-0.15
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: SEE ING
Other REC Limits:N/K 
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:MANGANESE. %:<0.04-0.7
CAS:7439-96-5
Fraction by Wt: SEE ING
Other REC Limits:N/K (FPN/ORNL)
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:IN SOLID STATE NO INHAL, INGEST, CONT
    HAZ. OPERATIONS SUCH  AS BURNING, WELDING, GRINDING, ETC. GEN
    DUST/FUMES MAY PRESENT HAZS. ACUTE:EXCESS INHAL OF METALLIC
    FUMES/DUST MAY CAUSE IRRIT OF EYES, NOSE , THROAT, METAL FUME FEVER
    (METALLIC TASTE, DRYNESS & IRRIT OF THROAT, CHILLS, FEVER, 12-48 HR
    SYMPS).(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHROMIUM CMPDS:IARC GRP 1, NTP KNOWN
    CARCINOGEN. LEAD:IARC GRP 2B. NICKEL:IARC GRP 1, NTP ANTICIPATED
    CARCINOGEN.
Effects of Overexposure:HLTH HAZ:CHRONIC:CHRONIC & PRLNG INHAL OF HIGH
    CONCS MAY CAUSE FOLLOWING:ING 2:FIBROTIC LUNG CHANGES; ING 6 &
    12:LESIONS OF SKIN/MUC MEMBS, CANCER OF NOSE/LUNGS; ING
    1:SIDEROSIS, PULM EFTS; ING 9:ANEM IA, URINARY EFTS, WEAK, CONSTIP,
    NAUS, NERV DISORDER; ING 10:BRONCH, PNEUM, LACK OF COORD; ING
    11:RESP TRACT (SUPDAT)
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY DISORDERS
    (ASTHMA, EMPHYSEMA, BRONCHITIS, ETC).

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR,IF CONDTN CONTINUES CONSULT
    PHYS.EYES:FLUSH W/ RUNNING WATER FOR AT LEAST 15 MIN TO REMOVE
    PARTICLES;OBTAIN MEDICAL ATTENTION.SKIN:REMOVE PARTICLES BY WASHING
    THOROUGHLY W/ S OAP & WATER.SEEK MEDICAL ATTENTION IF CONDITION
    PERSISTS.INGEST:IF SIGNIFICANT AMOUNTS OF METAL INGESTED CONSULT
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOR MOLTEN METAL USE DRY POWDER OR SAND. DONT USE
    WATER ON MOLTEN METAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
    .
Unusual Fire/Explosion Hazard:NO FIRE/EXPLOSION HAZ UNDER NORMAL
    CONDTN.FINE PARTICLES FROM GRINDING OR SAWING CAN BURN.HIGH CONC OF
    METALLIC FINES IN AIR MAY PRESENT EXPLOSION HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FINE TURNINGS & SMALL CHIPS SHOULD BE SWEPT OR
    VACCUMED.SCRAP METAL CAN BE RECLAIMED FOR REUSE.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:N/K 
Other Precautions:IN WELDING,PRECAUT SHOULD BE TAKEN FOR AIRBORNE
    CONTAM OF WELDING ROD.ARC OR SPARK GENERATED WHEN WELDING OR
    BURNING COULD BE SOURCE OF IGNITION FOR COMBUSTIBLE & FLAMMABLE
    MATERIALS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED APPROPRIATE DUST/MIST/FUME
    RESPIRATOR SHOULD BE USED TO AVOID EXCESSIVE INHALATION OF
    PARTICULATES. IF EXPOSURE LIMITS ARE REACHED OR EXCEEDED, USE
    NIOSH/MSHA APPROVED EQUIPMENT.
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP AIR CONCENTRATION BELOW
    TLV 
Protective Gloves:PROT GLOVES AS REQD FOR WELDING,(ING 20)
Eye Protection:SAFETY GLASSES FOR CUTTING & (ING 21)
Other Protective Equipment:AS REQUIRED DEPENDING ON OPERATIONS & SAFETY
    CODES.
Work Hygienic Practices:N/K 
Supplemental Safety and Health
EFTS OF OVEREXP:IRRIT, LIVER/KIDNEY DMG, BONE DEFORMITY; ING
    13:NECROSIS OF MANDIBLE; ING 15:EDEMA OF LUNGS; ING 16:EMPHYSEMA,
    PNEUM; ING 17:GI INFLAMM. NOTE:LEAD (7439-92-1) APPEARS ON NAVY
    LIST OF O CCUP REPRO HAZS. SEEK CONSULTATION FROMAPPROP HLTH PROFS
    CONCERNING LATEST HAZ LIST INFO & SAFE HANDLING & (ING 19)

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2800F,1540C
Decomp Temp:Decomp Text:N/K 
Spec Gravity:7 (H*2O=1)
Evaporation Rate & Reference:N/K 
Appearance and Odor:SOLID,GREY-BLACK,ODORLESS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REACTS W/ STRONG ACIDS TO FORM HYDROGEN GAS.
Stability Condition to Avoid:ABOVE MP MAY LIBERATE FUMES OF OXIDES OF
    IRON & ALLOYING ELEMENTS.AVOID GENERATION OF AIRBORNE FUME & DUST.
Hazardous Decomposition Products:METALLIC DUST OR FUMES DURING
    WELDING,BURNING,GRINDING & POSS MACHINING.

====================  Disposal Considerations  ====================

Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE DISPOSED OF
    I/A/W FEDERAL, STATE & LOCAL DISPOSAL OR DISCHARGE LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.